Literature DB >> 18325862

Porous scaffold of gelatin-starch with nanohydroxyapatite composite processed via novel microwave vacuum drying.

Jaya Sundaram1, Timothy D Durance, Rizhi Wang.   

Abstract

Hydroxyapatite (HA) is a fundamental mineral-based biomaterial, used for preparing composites for bone repair and regeneration. Gelatin blended with starch results in scaffold composites with enhanced mechanical properties. A gelatin-starch blend reinforced with HA nanocrystals (nHA) gave biocompatible composites with enhanced mechanical properties. In this study, a porous scaffold of gelatin-starch-nHA composites was fabricated through microwave vacuum drying and crosslinking using trisodium citrate. Three different composite scaffolds were prepared at three different percentages of nHA: 20%, 30% and 40%. The microstructures and compositions of the composites were analyzed. Within the porous structure, the nHA crystals were observed to precipitate. The interaction between the gelatin-starch network film and nHA crystalline material was studied using Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction analysis (XRD). XRD reflections showed that there are two different minerals present in the scaffold composite. There were strong reflection peaks close to the 26 degrees and 32 degrees 2theta angles of HA, and close to the 8 degrees and 49 degrees 2theta angles for sodium citrate minerals. The FTIR result suggested that carboxyl groups, C=O and amino groups play crucial roles in HA formation on the surface of a gelatin network.

Entities:  

Mesh:

Substances:

Year:  2008        PMID: 18325862     DOI: 10.1016/j.actbio.2008.01.019

Source DB:  PubMed          Journal:  Acta Biomater        ISSN: 1742-7061            Impact factor:   8.947


  6 in total

1.  Nanogels of carboxymethyl chitosan and lysozyme encapsulated amorphous calcium phosphate to occlude dentinal tubules.

Authors:  Jinhua Song; Haorong Wang; Yunqi Yang; Zuohui Xiao; Haibao Lin; Lichun Jin; Yan Xue; Mingli Lin; Fuyu Chen; Mengqi Zhu; Yanhong Zhao; Zhongjun Qiu; Yanqiu Li; Xu Zhang
Journal:  J Mater Sci Mater Med       Date:  2018-06-11       Impact factor: 3.896

2.  Fabrication of polyvinyl alcohol-graphene nanosheet nanocomposite loading of omega-3 fatty acids for ceramic engineering.

Authors:  Pegah Bitaraf; Azadeh Asefnejad; Nahid Hassanzadeh Nemati
Journal:  Iran J Basic Med Sci       Date:  2022-03       Impact factor: 2.532

3.  Gelatin-layered and multi-sized porous β-tricalcium phosphate for tissue engineering scaffold.

Authors:  Sung-Min Kim; Soon-Aei Yi; Seong-Ho Choi; Kwang-Mahn Kim; Yong-Keun Lee
Journal:  Nanoscale Res Lett       Date:  2012-01-17       Impact factor: 4.703

4.  Fabrication and Physical Evaluation of Gelatin-Coated Carbonate Apatite Foam.

Authors:  Kanae Hara; Kenji Fujisawa; Hirokazu Nagai; Natsumi Takamaru; Go Ohe; Kanji Tsuru; Kunio Ishikawa; Youji Miyamoto
Journal:  Materials (Basel)       Date:  2016-08-23       Impact factor: 3.623

5.  Tailoring mechanical properties and degradation rate of maxillofacial implant based on sago starch/polylactid acid blend.

Authors:  Y Whulanza; A Azadi; S Supriadi; S F Rahman; M Chalid; M Irsyad; M H Nadhif; P Kreshanti
Journal:  Heliyon       Date:  2021-12-13

6.  Bioactive Low Molecular Weight Keratin Hydrolysates for Improving Skin Wound Healing.

Authors:  Laura Olariu; Brindusa Georgiana Dumitriu; Carmen Gaidau; Maria Stanca; Luiza Mariana Tanase; Manuela Diana Ene; Ioana-Rodica Stanculescu; Cristina Tablet
Journal:  Polymers (Basel)       Date:  2022-03-11       Impact factor: 4.329

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.