| Literature DB >> 18313217 |
Teh-Long Lai1, Jyong-Yue Liu, Kim-Fui Yong, Youn-Yuen Shu, Chen-Bin Wang.
Abstract
Microwave-enhance catalytic degradation (MECD) of 4-chlorophenol (4-CP) using nickel oxide was studied. A mix-valenced nickel oxide was obtained from nickel nitrate aqueous solution through a precipitation with sodium hydroxide and an oxidation by sodium hypochlorite (assigned as PO). Then, the as-prepared PO was irradiated under microwave irradiation to fabricate a high active mix-valenced nickel oxide (assigned as POM). Further, pure nanosized nickel oxide was obtained from the POM by calcination at 300, 400 and 500 degrees C (labeled as C300, C400 and C500, respectively). They were characterized by X-ray (XRD), infrared spectroscopy (IR) and temperature-programmed reduction (TPR). Their catalytic activities towards the degradation of 4-CP on the efficiency of the degradation were further investigated under continuous bubbling of air through the liquid-phase and quantitative evaluation by high pressure liquid chromatography (HPLC). Also, the effects of temperature, pH and kinds of catalysts on the efficiency of the degradation have been investigated. The results showed that the 4-CP was degraded completely by MECD method within 20 min under pH 7, T=40 degrees C and C=200 g dm(-3) over POM catalyst. The relative activity was affected significantly with the oxidation state of nickel.Entities:
Mesh:
Substances:
Year: 2008 PMID: 18313217 DOI: 10.1016/j.jhazmat.2008.01.009
Source DB: PubMed Journal: J Hazard Mater ISSN: 0304-3894 Impact factor: 10.588