Multivariate approach to the measurement of tomato maturity and gustatory attributes and their rapid assessment by Vis-NIR spectroscopy.

Standard methods for determining quality and maturity are time- and labor-consuming and generally measure individual criteria at a specific time, without considering relationships among quality parameters. To propose a rapid and nondestructive analysis method describing multidimensional quality variables, an experiment was undertaken with mature green to overripe tomato fruits found on the North American retail markets. Factor analysis was used to analyze results. Four factors were considered, representing 81% of total variance. The first one, tomato maturity stage (TMS), is related to color, lycopene content, firmness, titratable acidity (TA), pH, and soluble solids (SS). Nondestructive rapid assessment by vis-NIR spectroscopy can predict TMS (r(2)=0.93). Factors 2 and 3 are both related to taste and should be considered simultaneously. Factor 2, called the gustatory index, is linked to electrical conductivity (EC), SS, TA, and pH. Factor 3, defined by SS, can be directly measured by a refractometer. Four categories of taste are proposed; the most desirable one ranks high both in soluble solids (above 4.5 degrees Brix) and in gustatory index (above 0). It was not possible to measure the gustatory index by vis-NIR spectroscopy (r(2)=0.17), but it can be estimated by EC, using a simple formula. The proposed limit between high and low gustatory index then corresponds to an EC of 5.4 mS/cm. Factor 4, variety, mostly discriminates the pink tomato type and field-grown samples from other varieties.