STATEMENT OF PROBLEM: It has been shown that under cyclic loading, more chipping fractures of the veneer ceramic occur on the occlusal surface of screw-retained implant-supported fixed partial dentures (FPDs) with unrestored screw access holes (SAHs) than in cemented restorations. This lack of stability may result in esthetic and functional problems. PURPOSE: The purpose of this study was to investigate whether, under dynamic loading, fewer chipping fractures occur on the occlusal surface of screw-retained ceramic veneered implant FPDs with restored SAHs than in those with unrestored SAHs. MATERIAL AND METHODS: Twenty screw-retained ceramic veneered 5-unit FPDs were manufactured for a 3-implant situation and divided into 2 groups of 10 unrestored and 10 SAHs restored with adhesive composite resin restorations (Tetric Evo Ceram). A masticatory simulator was used to load the FPDs occlusal to the implant positions for 20,000 cycles with a force of 100 N applied for 1 second, followed by 1 second of no loading. Three prosthodontists evaluated the FPDs using a light microscope and a dental probe. The number of chipping fractures found were analyzed using a generalized linear model with Poisson response and log link function (alpha =.05). RESULTS: Investigators found significantly more chipping fractures in the group of screw-retained FPDs with unrestored SAHs. The rate ratio of unrestored versus restored prostheses was 3.29 (P=.006). CONCLUSIONS: Adhesive composite resin restorations can significantly reduce the number of chipping fractures occurring around the SAHs of screw-retained implant-supported restorations.
STATEMENT OF PROBLEM: It has been shown that under cyclic loading, more chipping fractures of the veneer ceramic occur on the occlusal surface of screw-retained implant-supported fixed partial dentures (FPDs) with unrestored screw access holes (SAHs) than in cemented restorations. This lack of stability may result in esthetic and functional problems. PURPOSE: The purpose of this study was to investigate whether, under dynamic loading, fewer chipping fractures occur on the occlusal surface of screw-retained ceramic veneered implant FPDs with restored SAHs than in those with unrestored SAHs. MATERIAL AND METHODS: Twenty screw-retained ceramic veneered 5-unit FPDs were manufactured for a 3-implant situation and divided into 2 groups of 10 unrestored and 10 SAHs restored with adhesive composite resin restorations (Tetric Evo Ceram). A masticatory simulator was used to load the FPDs occlusal to the implant positions for 20,000 cycles with a force of 100 N applied for 1 second, followed by 1 second of no loading. Three prosthodontists evaluated the FPDs using a light microscope and a dental probe. The number of chipping fractures found were analyzed using a generalized linear model with Poisson response and log link function (alpha =.05). RESULTS: Investigators found significantly more chipping fractures in the group of screw-retained FPDs with unrestored SAHs. The rate ratio of unrestored versus restored prostheses was 3.29 (P=.006). CONCLUSIONS: Adhesive composite resin restorations can significantly reduce the number of chipping fractures occurring around the SAHs of screw-retained implant-supported restorations.