Literature DB >> 17960273

Monolithic Teflon membrane valves and pumps for harsh chemical and low-temperature use.

Peter A Willis1, Brian D Hunt, Victor E White, Michael C Lee, Michael Ikeda, Sam Bae, Michael J Pelletier, Frank J Grunthaner.   

Abstract

Microfluidic diaphragm valves and pumps capable of surviving conditions required for unmanned spaceflight applications have been developed. The Pasteur payload of the European ExoMars Rover is expected to experience temperatures ranging between -100 degrees C and +50 degrees C during its transit to Mars and on the Martian surface. As such, the Urey instrument package, which contains at its core a lab-on-a-chip capillary electrophoresis analysis system first demonstrated by Mathies et al., requires valving and pumping systems that are robust under these conditions before and after exposure to liquid samples, which are to be analyzed for chemical signatures of past or present living processes. The microfluidic system developed to meet this requirement uses membranes consisting of Teflon and Teflon AF as a deformable material in the valve seat region between etched Borofloat glass wafers. Pneumatic pressure and vacuum, delivered via off-chip solenoid valves, are used to actuate individual on-chip valves. Valve sealing properties of Teflon diaphragm valves, as well as pumping properties from collections of valves, are characterized. Secondary processing for embossing the membrane against the valve seats after fabrication is performed to optimize single valve sealing characteristics. A variety of different material solutions are found to produce robust devices. The optimal valve system utilizes a membrane of mechanically cut Teflon sandwiched between two thin spun films of Teflon AF-1600 as a composite "laminated" diaphragm. Pump rates up to 1600 nL s(-1) are achieved with pumps of this kind. These high pumping rates are possible because of the very fast response of the membranes to applied pressure, enabling extremely fast pump cycling with relatively small liquid volumes, compared to analogous diaphragm pumps. The developed technologies are robust over extremes of temperature cycling and are applicable in a wide range of chemical environments.

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 17960273     DOI: 10.1039/b707892g

Source DB:  PubMed          Journal:  Lab Chip        ISSN: 1473-0189            Impact factor:   6.799


  6 in total

1.  Whole-Teflon microfluidic chips.

Authors:  Kangning Ren; Wen Dai; Jianhua Zhou; Jing Su; Hongkai Wu
Journal:  Proc Natl Acad Sci U S A       Date:  2011-05-02       Impact factor: 11.205

2.  Chemical-assisted bonding of thermoplastics/elastomer for fabricating microfluidic valves.

Authors:  Pan Gu; Ke Liu; Hong Chen; Toshikazu Nishida; Z Hugh Fan
Journal:  Anal Chem       Date:  2010-12-01       Impact factor: 6.986

3.  The use of polyurethane as an elastomer in thermoplastic microfluidic devices and the study of its creep properties.

Authors:  Pan Gu; Toshikazu Nishida; Z Hugh Fan
Journal:  Electrophoresis       Date:  2013-09-14       Impact factor: 3.535

4.  Teflon films for chemically-inert microfluidic valves and pumps.

Authors:  William H Grover; Marcio G von Muhlen; Scott R Manalis
Journal:  Lab Chip       Date:  2008-04-11       Impact factor: 6.799

5.  Getting started with open-hardware: development and control of microfluidic devices.

Authors:  Eric Tavares da Costa; Maria F Mora; Peter A Willis; Claudimir L do Lago; Hong Jiao; Carlos D Garcia
Journal:  Electrophoresis       Date:  2014-07-14       Impact factor: 3.535

Review 6.  Droplets formation and merging in two-phase flow microfluidics.

Authors:  Hao Gu; Michel H G Duits; Frieder Mugele
Journal:  Int J Mol Sci       Date:  2011-04-15       Impact factor: 5.923

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.