Literature DB >> 17915710

Investigation of basic properties of fly ash from urban waste incinerators in China.

Jian-guo Jiang1, Xin Xu, Jun Wang, Shi-jian Yang, Yan Zhang.   

Abstract

Basic properties of fly ash samples from different urban waste combustion facilities in China were analyzed using as X-ray fluorescence (XRF), scanning electron microscopy (SEM), X-ray diffraction (XRD). The leaching toxicity procedure and some factors influencing heavy metals distribution in fly ash were further investigated. Experimental results indicate that the fly ash structures are complex and its properties are variable. The results of XRF and SEM revealed that the major elements (>10000 mg/kg, listed in decreasing order of abundance) in fly ash are O, Ca, Cl, Si, S, K, Na, Al, Fe and Zn. These elements account for 93% to 97%, and the content of Cl ranges from 6.93% to 29.18 %, while that of SiO2 does from 4.48% to 24.84%. The minor elements (1000 to 10000 mg/kg) include Cr, Cu and Pb. Primary heavy metals in fly ash include Zn, Pb, Cr, Cu etc. According to standard leaching test, heavy metal leaching levels vary from 0 to 163.10 mg/L (Pb) and from 0.049 to 164.90 mg/L (Zn), mostly exceeding the Chinese Identification Standard for hazardous wastes. Morphology of fly ash is irregular, with both amorphous structures and polycrystalline aggregates. Further research showed that heavy metals were volatilized at a high furnace temperature, condensed when cooling down during the post-furnace system and captured at air pollution control systems. Generally, heavy metals are mainly present in the forms of aerosol particulates or tiny particulates enriched on surfaces of fly ash particles. The properties of fly ash are greatly influenced by the treatment capacities of incinerators or the variation of waste retention time in chamber. Fly ash from combustors of larger capacities generally has higher contents of volatile component and higher leaching toxicity, while those of smaller capacities often produce fly ash containing higher levels of nonvolatile components and has lower toxicity. The content of heavy metals and leaching toxicity maybe have no convincing correlation, and high alkali content of CaO greatly contribute to leaching toxicity of heavy metal and acid neutralization capacity against acid rain.

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 17915710     DOI: 10.1016/s1001-0742(07)60076-x

Source DB:  PubMed          Journal:  J Environ Sci (China)        ISSN: 1001-0742            Impact factor:   5.565


  3 in total

1.  Role of Fe2O3 in fly ash surrogate on PCDD/Fs formation from 2-monochlorophenol.

Authors:  Xia Guan; Ajit Ghimire; Phillip M Potter; Slawomir M Lomnicki
Journal:  Chemosphere       Date:  2019-03-29       Impact factor: 7.086

2.  Synergy of iron and copper oxides in the catalytic formation of PCDD/Fs from 2-monochlorophenol.

Authors:  Phillip M Potter; Xia Guan; Slawomir M Lomnicki
Journal:  Chemosphere       Date:  2018-03-20       Impact factor: 7.086

3.  Potentially toxic elements in fly ash dependently of applied technology of hard coal combustion.

Authors:  Danuta Smolka-Danielowska; Dorota Fiedor
Journal:  Environ Sci Pollut Res Int       Date:  2018-06-24       Impact factor: 4.223

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.