Literature DB >> 1791563

The transverse strengths of three denture base resins.

D L Dixon1, K G Ekstrand, L C Breeding.   

Abstract

Ten specimens each of (1) Lucitone 199, short- and long-cured, (2) Accelar 20, and (3) Triad materials were broken using a 3-point load on an Instron Universal testing machine after processing and air drying. Five specimens of each resin also were broken after storage in deionized distilled water at 37 degrees C for 30, 60, and 90 days. Triad material demonstrated the lowest transverse strengths of all three materials overall. However, Triad material was unaffected by water storage. The other resins all showed decreased strengths with water storage.

Entities:  

Mesh：

Substances：

Year:  1991        PMID： 1791563     DOI： 10.1016/0022-3913(91)90514-w

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN： 0022-3913            Impact factor:   3.426


  4 in total

1.  Effect of Dietary Simulating Solvents on the Mechanical Properties of Provisional Restorative Materials-An In Vitro Study.

Authors:  Bipin Y Muley; Sameera R Shaikh; Mohana M Tagore; Arun N Khalikar
Journal:  J Indian Prosthodont Soc       Date:  2014-06-15

2.  Comparison of the Water Sorption and Solubility of Four Reline Acrylic Resins after Immersion in Food-Simulating Agents.

Authors:  Mitra Zirak; Mahroo Vojdani; Sorour Mohammadi; Amir-Alireza Khaledi
Journal:  J Int Soc Prev Community Dent       Date:  2019-02-14

3.  Ultrasonic cleaning reduces the residual monomer in acrylic resins.

Authors:  Taksid Charasseangpaisarn; Chairat Wiwatwarrapan; Nonthida Leklerssiriwong
Journal:  J Dent Sci       Date:  2016-11-14       Impact factor: 2.080

4.  Influence of incorporation of fluoroalkyl methacrylates on roughness and flexural strength of a denture base acrylic resin.

Authors:  Tatiana Ramirez Cunha; Romulo Rocha Regis; Marília Rodrigues Bonatti; Raphael Freitas de Souza
Journal:  J Appl Oral Sci       Date:  2009 Mar-Apr       Impact factor: 2.698
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.