Enhanced fluoride sorption by mechanochemically activated kaolinites.

Kaolinite clay obtained from the mines was processed and studied for its fluoride sorption capacity. The surface area of the clay mineral was increased from 15.11 m(2)/g (raw) to 32.43 m(2)/g (activated) by mechanochemical activation. Batch adsorption studies were conducted to optimize various equilibrating conditions like the effect of contact time, dosage, pH for both raw and micronized kaolinites (RK and MK). The effect of other interfering anions on the defluoridation capacity (DC) of the sorbents was studied. Sorption of fluoride by the sorbents was observed over a wide pH range of 3-11. The studies revealed there is an enhanced fluoride sorption on MK. FTIR and XRD were used for the characterization of the sorbent. The surface morphology of the clay material was observed using SEM. The adsorption of fluoride was studied at three different temperatures, viz., 303, 313 and 323 K. The sorption data obtained at optimized conditions were subjected to Freundlich and Langmuir isotherms. Sorption intensity (1/n) (0.770-0.810) has been evaluated using Freundlich isotherm, whereas the values of sorption capacity Q(0) (0.609, 0.714 and 0.782 mg/g) and binding energy b (0.158, 0.145 and 0.133 L/mg) at three different temperatures have been estimated using Langmuir isotherm. Adsorption process was found to be controlled by both Freundlich and Langmuir isotherms. Thermodynamic studies revealed that the sorption of fluoride on MK is endothermic and a spontaneous process. The kinetic studies indicate that the sorption of fluoride on MK follows pseudo-first-order and intraparticle diffusion models.