In vivo characterization of the mechanical properties of human skin derived from MRI and indentation techniques.

The human skin is an exceedingly complex and multi-layered material. This paper aims to introduce the application of the finite element analysis (FEA) to the in vivo characterization of the non-linear mechanical behaviour of three human skin layers. Indentation tests combined with magnetic resonance imaging (MRI) technique have been performed on the left dorsal forearm of a young man in order to reveal the mechanical behaviour of all skin layers. Using MRI images processing and a pre and post processor allows to make numerically individualized 2D model which consists of three skin layers and the muscles. FEA has been applied to simulate indentation tests. Neo-Hookean slightly compressible material model of two material constants (C(10), K) has been used to model the mechanical behaviour of the three skin layers and the muscles. The identification of material model parameters was done by applying Levenberg-Marquardt algorithm (LMA). Our methodology of identification provides a range of values for each constant. Range of values of different material properties of epidermis, dermis, hypodermis are respectively, C10(E)=0.12+/-0.06 MPa, C10(D)=1.11+/-0.09 MPa, C10(H)=0.42+/-0.05 KPa, K(E)=5.45+/-1.7 MPa, K(D)=29.6+/-1,28 MPa, K(H)=36.0+/-0.9 KPa.