Literature DB >> 17888640

Synthesis and characterization of cyclic acetal based degradable hydrogels.

Sachiko Kaihara1, Shuichi Matsumura, John P Fisher.   

Abstract

While many synthetic, hydrolytically degradable hydrogels have been developed for biomedical applications, there are only a few examples whose polymer backbone does not form acidic products upon degradation. In order to address this concern, we proposed to develop a hydrogel based on a cyclic acetal unit that produces diols and propanals upon hydrolytic degradation. In particular, we proposed the fabrication of hydrogels formed by the free radical polymerization of two diacrylate monomers, 5-ethyl-5-(hydroxymethyl)-beta,beta-dimethyl-1,3-dioxane-2-ethanol diacrylate (EHD), a cyclic acetal having two acryl groups, and poly(ethylene glycol)diacrylate (PEGDA). However, the hydrophobicity of the EHD monomer inhibits hydrogel fabrication. Therefore this work develops a strategy to form hydrogels with a co-monomer system, one of which is hydrophobic, and subsequently describes the properties of the resulting hydrogel. Using benzoyl peroxide as an initiator and N,N-dimethyl-p-toluidine as an accelerator, the EHD and PEGDA monomers were reacted in an acetone/water co-solvent system. The chemical structure of the resulting EH-PEG [5-ethyl-5-(hydroxymethyl)-beta,beta-dimethyl-1,3-dioxane-2-ethanol-co-PEG] hydrogel was then characterized by FT-IR. Physicochemical properties of the EH-PEG hydrogel, including swelling degree, sol fraction, and contact angle, were determined so as to characterize the properties of these materials and ultimately investigate their use in drug delivery and tissue engineering applications. Results showed that EH-PEG hydrogel may be formed using the co-solvent system. Further results indicated that swelling degree is dependent upon initiator concentration, monomer concentration, and molar ratios of monomers, while sol fraction significantly depended on initiator concentration and monomer concentration, only. These results demonstrate the ability to fabricate hydrogels using EHD and PEGDA system as well as to control the properties of the resulting hydrophilic networks.

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 17888640     DOI: 10.1016/j.ejpb.2007.05.019

Source DB:  PubMed          Journal:  Eur J Pharm Biopharm        ISSN: 0939-6411            Impact factor:   5.571


  9 in total

Review 1.  Recent developments in cyclic acetal biomaterials for tissue engineering applications.

Authors:  Erin E Falco; Minal Patel; John P Fisher
Journal:  Pharm Res       Date:  2008-06-07       Impact factor: 4.200

2.  Biodegradable poly(ethylene glycol) hydrogels based on a self-elimination degradation mechanism.

Authors:  Manjeet Deshmukh; Yashveer Singh; Simi Gunaseelan; Dayuan Gao; Stanley Stein; Patrick J Sinko
Journal:  Biomaterials       Date:  2010-06-19       Impact factor: 12.479

3.  Citric-acid-derived photo-cross-linked biodegradable elastomers.

Authors:  Dipendra Gyawali; Richard T Tran; Kristine J Guleserian; Liping Tang; Jian Yang
Journal:  J Biomater Sci Polym Ed       Date:  2010-06-16       Impact factor: 3.517

Review 4.  Bioactive modification of poly(ethylene glycol) hydrogels for tissue engineering.

Authors:  Junmin Zhu
Journal:  Biomaterials       Date:  2010-03-19       Impact factor: 12.479

Review 5.  Design properties of hydrogel tissue-engineering scaffolds.

Authors:  Junmin Zhu; Roger E Marchant
Journal:  Expert Rev Med Devices       Date:  2011-09       Impact factor: 3.166

6.  Porous EH and EH-PEG scaffolds as gene delivery vehicles to skeletal muscle.

Authors:  Erin E Falco; Martha O Wang; Joshua A Thompson; Joshua M Chetta; Diana M Yoon; Erik Z Li; Mangesh M Kulkami; Sameer Shah; Abhay Pandit; J Scott Roth; John P Fisher
Journal:  Pharm Res       Date:  2011-01-19       Impact factor: 4.200

Review 7.  Investigation of potential injectable polymeric biomaterials for bone regeneration.

Authors:  Michael B Dreifke; Nabil A Ebraheim; Ambalangodage C Jayasuriya
Journal:  J Biomed Mater Res A       Date:  2013-02-11       Impact factor: 4.396

Review 8.  Hydrogel: Preparation, characterization, and applications: A review.

Authors:  Enas M Ahmed
Journal:  J Adv Res       Date:  2013-07-18       Impact factor: 10.479

Review 9.  Additive Manufacturing of Biomaterials-Design Principles and Their Implementation.

Authors:  Mohammad J Mirzaali; Vahid Moosabeiki; Seyed Mohammad Rajaai; Jie Zhou; Amir A Zadpoor
Journal:  Materials (Basel)       Date:  2022-08-08       Impact factor: 3.748

  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.