Literature DB >> 17880182

Reference-free total reflection X-ray fluorescence analysis of semiconductor surfaces with synchrotron radiation.

Burkhard Beckhoff1, Rolf Fliegauf, Michael Kolbe, Matthias Müller, Jan Weser, Gerhard Ulm.   

Abstract

Total reflection X-ray fluorescence (TXRF) analysis is a well-established method to monitor lowest level contamination on semiconductor surfaces. Even light elements on a wafer surface can be excited effectively when using high-flux synchrotron radiation in the soft X-ray range. To meet current industrial requirements in nondestructive semiconductor analysis, the Physikalisch-Technische Bundesanstalt (PTB) operates dedicated instrumentation for analyzing light element contamination on wafer pieces as well as on 200- and 300-mm silicon wafer surfaces. This instrumentation is also suited for grazing incidence X-ray fluorescence analysis and conventional energy-dispersive X-ray fluorescence analysis of buried and surface nanolayered structures, respectively. The most prominent features are a high-vacuum load-lock combined with an equipment front end module and a UHV irradiation chamber with an electrostatic chuck mounted on an eight-axis manipulator. Here, the entire surface of a 200- or a 300-mm wafer can be scanned by monochromatized radiation provided by the plane grating monochromator beamline for undulator radiation in the PTB laboratory at the electron storage ring BESSY II. This beamline provides high spectral purity and high photon flux in the range of 0.078-1.86 keV. In addition, absolutely calibrated photodiodes and Si(Li) detectors are used to monitor the exciting radiant power respectively the fluorescence radiation. Furthermore, the footprint of the excitation radiation at the wafer surface is well-known due to beam profile recordings by a CCD during special operation conditions at BESSY II that allow for drastically reduced electron beam currents. Thus, all the requirements of completely reference-free quantitation of TXRF analysis are fulfilled and are to be presented in the present work. The perspectives to arrange for reference-free quantitation using X-ray tube-based, table-top TXRF analysis are also addressed.

Entities:  

Year:  2007        PMID: 17880182     DOI: 10.1021/ac071236p

Source DB:  PubMed          Journal:  Anal Chem        ISSN: 0003-2700            Impact factor:   6.986


  3 in total

1.  A new non-destructive method for chemical analysis of particulate matter filters: the case of manganese air pollution in Vallecamonica (Italy).

Authors:  Laura Borgese; Annalisa Zacco; Sudipto Pal; Elza Bontempi; Roberto Lucchini; Neil Zimmerman; Laura E Depero
Journal:  Talanta       Date:  2011-01-13       Impact factor: 6.057

2.  Characterization of High-k Nanolayers by Grazing Incidence X-ray Spectrometry.

Authors:  Matthias Müller; Philipp Hönicke; Blanka Detlefs; Claudia Fleischmann
Journal:  Materials (Basel)       Date:  2014-04-17       Impact factor: 3.623

Review 3.  Traceable Characterization of Nanomaterials by X-ray Spectrometry Using Calibrated Instrumentation.

Authors:  Burkhard Beckhoff
Journal:  Nanomaterials (Basel)       Date:  2022-06-30       Impact factor: 5.719

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.