Literature DB >> 1787214

Effect of the curing cycle on acrylic denture base glass transition temperatures.

V Jerolimov1, R G Jagger, P J Milward.   

Abstract

Glass transition temperature of a polymer is an important physical property which may have a major effect on the dimensional stability of denture base materials. Thermomechanical analysis has been used to determine the glass transition temperature of specimens of denture base materials which had been produced by various selected curing cycles. It was found that different curing cycles produced variations in glass transition temperature of up to 20 degrees C.

Entities:  

Mesh：

Substances：

Year:  1991        PMID： 1787214     DOI： 10.1016/0300-5712(91)90128-l

Source DB:  PubMed          Journal:  J Dent        ISSN： 0300-5712            Impact factor:   4.379


  6 in total

1.  A comparative evaluation of the dimensional accuracy of heat polymerised PMMA denture base cured by different curing cycles and clamped by R S technique and conventional method - An In-vitro study.

Authors:  Mandava Ramesh Babu; C Satyanageswar Rao; Syed Tauqheer Ahmed; J S V Bharat; N Venugopal Rao; V Vinod
Journal:  J Int Oral Health       Date:  2014-04-26

2.  A Comparative Evaluation of the Linear Dimensional Changes of Two Different Commercially Available Heat Cure Acrylic Resins during Three Different Cooling Regimens.

Authors:  Abhishek Savirmath; Vandita Mishra
Journal:  J Clin Diagn Res       Date:  2016-11-01

3.  Effect of the processing cycle on dimensional changes of heat-polymerized denture base resins.

Authors:  Ghazal Savabi; Omid Savabi; Badrosadat Dastgheib; Farahnaz Nejatidanesh
Journal:  Dent Res J (Isfahan)       Date:  2015 Jul-Aug

4.  Mechanical and thermal properties of polyamide versus reinforced PMMA denture base materials.

Authors:  Koray Soygun; Giray Bolayir; Ali Boztug
Journal:  J Adv Prosthodont       Date:  2013-05-30       Impact factor: 1.904

5.  Characterization and bacterial anti-adherent effect on modified PMMA denture acrylic resin containing platinum nanoparticles.

Authors:  Ki-Young Nam
Journal:  J Adv Prosthodont       Date:  2014-06-24       Impact factor: 1.904

6.  Effect of a post-polymerization treatments on the flexural strength and Vickers hardness of reline and acrylic denture base resins.

Authors:  Rosangela Seiko Seo; Carlos Eduardo Vergani; Eunice Teresinha Giampaolo; Ana Claudia Pavarina; Ana Lucia Machado
Journal:  J Appl Oral Sci       Date:  2007-12       Impact factor: 2.698
  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.