Literature DB >> 17804330

Influence of different root canal-filling materials on the mechanical properties of root canal dentin.

Nicola M Grande1, Gianluca Plotino, Luca Lavorgna, Pietro Ioppolo, Rossella Bedini, Cornelis H Pameijer, Francesco Somma.   

Abstract

The aims of this study were to compare Resilon (Resilon Research LLC, Madison, CT) in conjunction with either a bonding (Epiphany; Pentron Clinical Technologies, Wallingford, CT) or a nonbonding endodontic sealer (Pulp Canal Sealer; Kerr Corporation, Orange, CA) to EndoRez (Ultradent Products Inc, South Jordan, UT) and gutta-percha with regards to the physical properties and flexural stress in standardized dentin cylinders and the flexural stress of Resilon and gutta-percha. The external surface of 50 maxillary central incisors was reduced by means of mechanical milling to obtain dentin cylinders with an external diameter of 3 mm and minimum length of 12 mm. Root canals were prepared to obtain a standardized cylindrical preparation of 1.3 mm in diameter at the center of the root. The cylinders were randomly divided into five groups (n = 10): group 1: obturation with gutta-percha and Pulp Canal Sealer; group 2: obturation with Resilon, Epiphany primer, and Epiphany; group 3: obturation with Resilon and Pulp Canal Sealer; group 4: obturation with EndoRez methacrylate-based endodontic sealer; and group 5: dentin cylinders were not obturated. Ten gutta-percha (group 6) and Resilon (group 7) pellets for the Obtura gun were also tested. A three-point bending test was used to measure the maximum load values of specimens from groups 1 to 5 and the flexural strength and flexural modulus values for specimens from groups 6 and 7. Statistical analysis was performed to determine significance differences (p < 0.05). An analysis of variance test showed no significant difference among groups 1 to 5 (p = 0.697; F = 0.60). An independent sample t test showed statistically significant differences between groups 6 and 7 in flexural strength (p = 0.000) and flexural modulus (p = 0.000). Within the limits of this study, it may be concluded that the currently available endodontic-filling materials and their recommended adhesive procedures are not able to influence the mechanical properties of root canal dentin and that the flexural properties of Resilon and gutta-percha are too low to reinforce roots.

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 17804330     DOI: 10.1016/j.joen.2007.02.018

Source DB:  PubMed          Journal:  J Endod        ISSN: 0099-2399            Impact factor:   4.171


  7 in total

1.  Fracture resistance of overtly flaring root canals filled with resin-based obturation material.

Authors:  Salma B Abdo; Aziza H Eldarrat
Journal:  Dent Res J (Isfahan)       Date:  2013-01

2.  Comparative evaluation of effect of rotary and reciprocating single-file systems on pericervical dentin: A cone-beam computed tomography study.

Authors:  Priyanka Ramdas Zinge; Jayaprakash Patil
Journal:  J Conserv Dent       Date:  2017 Nov-Dec

3.  Push-Out Bond Strength of Experimental Apatite Calcium Phosphate Based Coated Gutta-Percha.

Authors:  Afaf Y Al-Haddad; Muralithran G Kutty; Zeti Adura Che Ab Aziz
Journal:  Int J Biomater       Date:  2018-08-01

Review 4.  Resilon: a comprehensive literature review.

Authors:  Mehrdad Lotfi; Negin Ghasemi; Saeed Rahimi; Sepideh Vosoughhosseini; Mohammad Ali Saghiri; Atabak Shahidi
Journal:  J Dent Res Dent Clin Dent Prospects       Date:  2013-08-30

5.  The effect of storage temperature on mechanical properties of gutta-percha and resilon.

Authors:  Sedigheh Khedmat; Farzaneh Aghajani; Shabnam Zaringhalam
Journal:  J Dent (Tehran)       Date:  2013-11-30

6.  An in vitro Comparative Evaluation of Volume of Removed Dentin, Canal Transportation, and Centering Ratio of 2Shape, WaveOne Gold, and ProTaper Gold Files Using Cone-Beam Computed Tomography.

Authors:  Shalini Singh; Muqthadir Siddiqui Mohammed Abdul; Utsav Sharma; Shan Sainudeen; Chayan Jain; Jacob Tony Kalliath
Journal:  J Int Soc Prev Community Dent       Date:  2019-09-30

7.  Shaping Ability of XP Endo Shaper File in Curved Root Canal Models.

Authors:  Abdulmohsen Alfadley; Abdalrhman Alrajhi; Hamad Alissa; Faisal Alzeghaibi; Lubna Hamadah; Khalid Alfouzan; Ahmed Jamleh
Journal:  Int J Dent       Date:  2020-02-17
  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.