Literature DB >> 17654947

FTIR spectroscopy of multiwalled carbon nanotubes: a simple approach to study the nitrogen doping.

Abha Misra1, Pawan K Tyagi, Padmnabh Rai, D S Misra.   

Abstract

The nitrogen doped multiwalled carbon nanotubes (MWNTs) were synthesized by microwave plasma chemical vapor deposition (MPCVD) technique. In this paper, we report the results of FTIR, Raman, and TGA studies to confirm the presence of N-doping inside carbon nanotubes. Fourier transform infrared (FTIR) studies were carried out in the range 400-4000 cm(-1) to study the attachment of nitrogen impurities on carbon nanotubes. FTIR spectra of the virgin sample of MWNTs show dominant peaks which are corresponding to Si-O, C-N, N-CH3, CNT, C-O, and C-Hx, respectively. The Si-O peak has its origin in silicon substrate whereas the other peaks are due to the precursor gases present in the gas mixture. The peaks are sharp and highly intense showing the chemisorption nature of the dipole bond. The intensity of the peaks due to N-CH3, C-N, and C-H reduces after annealing. It is interesting to note that these peaks vanish on annealing at high temperature (900 degrees C). The presence of C-N peak may imply the doping of the MWNTs with N in substitution mode. The position of this intense peak is in agreement with the reported peak in carbon nitride samples prepared by plasma CVD process, since the Raman modes are also expected to be delocalized over both carbon and nitrogen sites it was found that the intensity ratio of the D and G peaks, I(D)/I(G), varies as a function of ammonia concentration. The TGA measurements, carried out under argon flow, show that the dominant weight loss of the sample occurs in the temperature range 400-600 degrees C corresponding to the removal of the impurities and amorphous carbon.

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 17654947     DOI: 10.1166/jnn.2007.723

Source DB:  PubMed          Journal:  J Nanosci Nanotechnol        ISSN: 1533-4880


  5 in total

1.  Adsorptive desulfurization of dibenzothiophene (DBT) in model petroleum distillate using functionalized carbon nanotubes.

Authors:  Olawumi Oluwafolakemi Sadare; Michael Olawale Daramola
Journal:  Environ Sci Pollut Res Int       Date:  2019-07-29       Impact factor: 4.223

2.  CVD Conditions for MWCNTs Production and Their Effects on the Optical and Electrical Properties of PPy/MWCNTs, PANI/MWCNTs Nanocomposites by In Situ Electropolymerization.

Authors:  Silvia Beatriz Brachetti-Sibaja; Diana Palma-Ramírez; Aidé Minerva Torres-Huerta; Miguel Antonio Domínguez-Crespo; Héctor Javier Dorantes-Rosales; Adela Eugenia Rodríguez-Salazar; Esther Ramírez-Meneses
Journal:  Polymers (Basel)       Date:  2021-01-22       Impact factor: 4.329

3.  Variation in the Performance of MWCNT/ZnO Hybrid Material with pH for Efficient Antibacterial Agent.

Authors:  Saima Rafique; Shazia Bashir; Rizwan Akram; Farrukh Bashir Kiyani; Shagufta Raza; Mozaffar Hussain; Sayyeda Kaneez Fatima
Journal:  Biomed Res Int       Date:  2022-02-04       Impact factor: 3.411

4.  Palladium/graphene oxide nanocomposites with carbon nanotubes and/or magnetite for the reduction of nitrophenolic compounds.

Authors:  L K Parrott; E Erasmus
Journal:  RSC Adv       Date:  2020-09-04       Impact factor: 4.036

5.  Synthesis and Characterization of MWCNT-COOH/Fe3O4 and CNT-COOH/Fe3O4/NiO Nanocomposites: Assessment of Adsorption and Photocatalytic Performance.

Authors:  Adina Stegarescu; Humberto Cabrera; Hanna Budasheva; Maria-Loredana Soran; Ildiko Lung; Francesca Limosani; Dorota Korte; Matteo Amati; Gheorghe Borodi; Irina Kacso; Ocsana Opriş; Monica Dan; Stefano Bellucci
Journal:  Nanomaterials (Basel)       Date:  2022-08-30       Impact factor: 5.719

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.