Preparation of multihollow polymer particles by seeded emulsion polymerization using seed particles with incorporated nonionic emulsifier.

Emulsion polymerizations of styrene using poly(oxyethylene) nonylphenyl ether nonionic emulsifier were carried out at different emulsifier and initiator (potassium persulfate, KPS) concentrations to prepare polystyrene (PS) seed particles with incorporated nonionic emulsifier. Seeded emulsion polymerizations of styrene using the PS seed particles with different amounts of incorporated emulsifier were carried out to develop a novel method for the preparation of multihollow particles. When seed particles with a small amount of incorporated emulsifier were used, non-hollow spherical particles were prepared. However, multihollow particles were obtained in the case of seed particles with a large amount of incorporated emulsifier. Moreover, the higher the initiator concentration in the preparation of seed particles, the more effectively were hollow particles prepared. On the basis of the above results, a mechanism for the formation of multihollow structure was suggested.