Literature DB >> 1762442

Species dependence of the zero-stress state of aorta: pig versus rat.

H C Han1, Y C Fung.   

Abstract

The zero-stress state of an aorta can be characterized by the angle with which each segment of the vessel opens up when it is cut radially. The opening angle varies with the region of the aorta: significantly with respect to the axial location, less significantly with respect to polar angle of the radial cut. Both pig and rat aortas have large opening angles in the neighborhood of 130 deg in the aortic arch region. In the thoracic region, the species difference is evident. The opening angle of the pig aorta in the middle thoracic region is rather constant in the neighborhood of 60 deg. The opening angle of the rat aorta in the thoracic region varies considerably, decreasing to 10 deg at the lower end of the thoracic region. In the abdominal region the opening angle of the pig increases from 60 to about 80 deg, that of the rat increases from about 10 to 90 deg. The potassium ion has effect on vascular smooth muscle, but has little effect on the opening angle. This suggests that the opening angle is not sensitive to smooth muscle contraction, similar to a previously known result that the opening angle is not affected by papaverine. The vessel wall thickness and vessel diameter were measured. It is shown that the ratio of the wall thickness to diameter of the pig is considerably larger than that of the rat throughout the aorta.(ABSTRACT TRUNCATED AT 250 WORDS)

Entities:  

Mesh:

Substances:

Year:  1991        PMID: 1762442     DOI: 10.1115/1.2895425

Source DB:  PubMed          Journal:  J Biomech Eng        ISSN: 0148-0731            Impact factor:   2.097


  19 in total

Review 1.  The zero-stress state of the gastrointestinal tract: biomechanical and functional implications.

Authors:  H Gregersen; G S Kassab; Y C Fung
Journal:  Dig Dis Sci       Date:  2000-12       Impact factor: 3.199

2.  Effects of Geometric Variations on the Buckling of Arteries.

Authors:  Parag Datir; Avione Y Lee; Shawn D Lamm; Hai-Chao Han
Journal:  Int J Appl Mech       Date:  2011-10-05       Impact factor: 3.224

Review 3.  Biomechanics of the cardiovascular system: the aorta as an illustratory example.

Authors:  Ghassan S Kassab
Journal:  J R Soc Interface       Date:  2006-12-22       Impact factor: 4.118

Review 4.  What are the residual stresses doing in our blood vessels?

Authors:  Y C Fung
Journal:  Ann Biomed Eng       Date:  1991       Impact factor: 3.934

5.  Growth and remodeling in a thick-walled artery model: effects of spatial variations in wall constituents.

Authors:  Patrick W Alford; Jay D Humphrey; Larry A Taber
Journal:  Biomech Model Mechanobiol       Date:  2007-09-02

6.  Prefailure and failure mechanics of the porcine ascending thoracic aorta: experiments and a multiscale model.

Authors:  Sachin B Shah; Colleen Witzenburg; Mohammad F Hadi; Hallie P Wagner; Janna M Goodrich; Patrick W Alford; Victor H Barocas
Journal:  J Biomech Eng       Date:  2014-02       Impact factor: 2.097

7.  Contribution of collagen fiber undulation to regional biomechanical properties along porcine thoracic aorta.

Authors:  Shahrokh Zeinali-Davarani; Yunjie Wang; Ming-Jay Chow; Raphaël Turcotte; Yanhang Zhang
Journal:  J Biomech Eng       Date:  2015-02-20       Impact factor: 2.097

8.  The effect of collagenase on the critical buckling pressure of arteries.

Authors:  Ricky Martinez; Hai-Chao Han
Journal:  Mol Cell Biomech       Date:  2012-03

9.  Patient-specific artery shrinkage and 3D zero-stress state in multi-component 3D FSI models for carotid atherosclerotic plaques based on in vivo MRI data.

Authors:  Xueying Huang; Chun Yang; Chun Yuan; Fei Liu; Gador Canton; Jie Zheng; Pamela K Woodard; Gregorio A Sicard; Dalin Tang
Journal:  Mol Cell Biomech       Date:  2009-06

10.  Early and late effects of irradiation on morphometry and residual strain of mouse rectum.

Authors:  Hans Gregersen; Lilli Lundby; Jens Overgaard
Journal:  Dig Dis Sci       Date:  2002-07       Impact factor: 3.199

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.