Literature DB >> 17618727

Measurement of opalescence of tooth enamel.

Yong-Keun Lee1, Bin Yu.   

Abstract

OBJECTIVES: Opalescent dental esthetic restoratives look natural and esthetic in any light, react to light in the same manner as the natural tooth and show improved masking effect. The objective of this study was to determine the opalescence of tooth enamel with reflection spectrophotometers.
METHODS: Color of intact bovine and human enamel was measured in the reflectance and transmittance modes. Two kinds of spectrophotometers were used for bovine and one kind was used for human enamel. The opalescence parameter (OP) was calculated as the difference in yellow-blue color coordinate (CIE Deltab(*)) and red-green color coordinate (CIE Deltaa(*)) between the reflected and transmitted colors.
RESULTS: Mean OP value of bovine enamel was 10.6 (+/-1.4) to 19.0 (+/-2.1), and varied by the configuration of spectrophotometers. Mean OP value of human enamel was 22.9 (+/-1.9).
CONCLUSIONS: Opalescence varied by the configuration of measuring spectrophotometer and the species of enamel. These values could be used in the development of esthetic restorative materials.

Entities:  

Mesh:

Year:  2007        PMID: 17618727     DOI: 10.1016/j.jdent.2007.05.010

Source DB:  PubMed          Journal:  J Dent        ISSN: 0300-5712            Impact factor:   4.379


  7 in total

1.  In Vivo Evaluation of the Effects of Sintering Temperature on the Optical Properties of Dental Glass-Ceramics.

Authors:  Kuo-Cheng Fan; Yu-Ling Lin; Hao-Wei Tsao; Hsuan Chen; Sheng-Yang Lee; Yu-Chen Cheng; Hsiao-Ping Huang; Wei-Chun Lin
Journal:  Nanomaterials (Basel)       Date:  2022-06-25       Impact factor: 5.719

2.  Effect of Cooling Rate on Mechanical Properties, Translucency, Opalescence, and Light Transmission Properties of Monolithic 4Y-TZP during Glazing.

Authors:  Ji-In Jeong; Hye-Jeong Shin; Yong Hoon Kwon; Hyo-Joung Seol
Journal:  Materials (Basel)       Date:  2022-06-20       Impact factor: 3.748

3.  Opalescence and color stability of composite resins: an in vitro longitudinal study.

Authors:  Daniele Esteves Pepelascov; Lidiane Vizioli de Castro-Hoshino; Leandro Herculano da Silva; Ronaldo Hirata; Francielle Sato; Mauro Luciano Baesso; Alex Sandro Centenaro; Andressa Novatski; Antonio Medina Neto; Raquel Sano Suga Terada
Journal:  Clin Oral Investig       Date:  2021-10-25       Impact factor: 3.573

4.  The effect of ceramic thickness on opalescence.

Authors:  Sara Valizadeh; Alireza Mahmoudi Nahavandi; Marzieh Daryadar; Mutlu Özcan; Sedighe Sadat Hashemikamangar
Journal:  Clin Exp Dent Res       Date:  2020-09-09

5.  Optical properties of CAD-CAM monolithic systems compared: three multi-layered zirconia and one lithium disilicate system.

Authors:  Tareq A Ziyad; Layla A Abu-Naba'a; Saleh N Almohammed
Journal:  Heliyon       Date:  2021-10-09

6.  Transmission of Curing Light through Moist, Air-Dried, and EDTA Treated Dentine and Enamel.

Authors:  E Uusitalo; J Varrela; L Lassila; P K Vallittu
Journal:  Biomed Res Int       Date:  2016-06-30       Impact factor: 3.411

7.  Fluorescence and Opalescence of Two Dental Composite Resins.

Authors:  Masoomeh Hasani Tabatabaei; Alireza Mahmoudi Nahavandi; Sotude Khorshidi; Sedighe Sadat Hashemikamangar
Journal:  Eur J Dent       Date:  2019-12-31
  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.