Structural characterization of corn fiber gums from coarse and fine fiber and a study of their emulsifying properties.

The stabilities of orange oil emulsions stabilized with various concentrations of two different types of corn fiber gum (CFG-1 and 2) isolated from coarse (pericarp) and fine (endosperm) fiber from corn wet milling have been studied. The emulsion stabilities in all these studies increased with increasing gum concentration up to a gum-to-oil ratio of 0.05, and after that it either levels off or changes very slightly. These results indicate that only 0.25% of CFG is required to make stable emulsion containing 5% orange oil under the experimental conditions used in this study. At this CFG concentration, CFG-2 from each fiber source was found to be a superior emulsifier relative to the corresponding CFG-1 from each source in a 10-day emulsion stability study at room temperature. The emulsion stability was also investigated by confocal laser scanning microscopy measurement, and it was found that CFG-1 and 2 from both coarse and fine fiber made stable emulsions with an average particle size of less than 1 mum for 10 days at room temperature. Sugar composition analysis of CFGs from both sources indicated that they were typical galactoglucuronoarabinoxylans containing mainly 55-59% xylose, 29-36% arabinose, and 4-6% galactose as neutral sugars and 3-5% glucuronic acid. Methylation analysis revealed a highly branched structure of all CFGs, in which only 16-25% of the 1--> 4-linked xylose residues were not substituted at O-2 and/or O-3. Arabinose is present both as a terminal residue and at branch points.