Literature DB >> 17550229

Molecularly imprinted polymers as antibody mimics in automated on-line fluorescent competitive assays.

Javier L Urraca1, María C Moreno-Bondi, Guillermo Orellana, Börje Sellergren, Andrew J Hall.   

Abstract

An automated molecularly imprinted sorbent based assay (MIA) for the rapid and sensitive analysis of penicillin-type beta-lactam antibiotics (BLAs) has been developed and optimized. The polymers were prepared using penicillin G procaine salt as template (PENGp) and a stoichiometric quantity of a urea-based functional monomer to target the single oxyanionic species in the template molecule. Highly fluorescent competitors (emission quantum yields of 0.4-0.95), molecularly engineered to contain pyrene labels while keeping intact the 6-aminopenicillanic acid moiety for efficient recognition by the cross-linked polymers, have been tested as analyte analogues in the competitive assay. Pyrenemethylacetamido penicillanic acid (PAAP) was the tagged antibiotic providing for the highest selectivity when competing with PenG for the specific binding sites in the molecularly imprinted polymer (MIP). Upon desorption from the MIP, the emission signal generated by the PAAP was related to the antibiotic concentration in the sample. The 50% binding inhibition concentration of penicillin G standard curves was at 1.81 x 10(-6) M PENG, and the detection limit was 1.97 x 10(-7) M. The sensor showed a dynamic range (normalized signal in the 20 to 80% range) from 6.80 x 10(-7) to 7.21 x 10(-6) M (20-80% binding inhibition) PENG in acetonitrile:HEPES buffer 0.1 M at pH 7.5 (40:60, v/v) solutions. Competitive binding studies demonstrated various degrees of cross-reactivity with penicillin-type beta-lactam antibiotics such as ampicillin (71%), oxacillin (66%), penicillin V (56%), amoxicillin (13%), and nafcillin (46%) and a lower response to other isoxazolyl penicillins such as cloxacillin (27%) and dicloxacillin (16%). The total analysis time was 14 min per determination, and the MIP reactor could be reused for more than 150 cycles without significant loss of recognition. The automatic MIA has been successfully applied to the direct analysis of penicillin G in spiked urine samples with excellent recoveries (mean value 92%). Results displayed by comparative analysis of the optimized MIA with a chromatographic procedure for penicillin G showed excellent agreement between both methods.

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 17550229     DOI: 10.1021/ac070277i

Source DB:  PubMed          Journal:  Anal Chem        ISSN: 0003-2700            Impact factor:   6.986


  5 in total

1.  A polypyrrole doped with fluorescent CdTe quantum dots and incorporated into molecularly imprinted silica for fluorometric determination of ampicillin.

Authors:  Phannika Raksawong; Piyaluk Nurerk; Kochaporn Chullasat; Proespichaya Kanatharana; Opas Bunkoed
Journal:  Mikrochim Acta       Date:  2019-05-09       Impact factor: 5.833

Review 2.  Bio-Inspired Imprinting Materials for Biomedical Applications.

Authors:  Hanxu Chen; Jiahui Guo; Yu Wang; Weiliang Dong; Yuanjin Zhao; Lingyun Sun
Journal:  Adv Sci (Weinh)       Date:  2022-07-31       Impact factor: 17.521

Review 3.  State-of-the-art of (bio)chemical sensor developments in analytical Spanish groups.

Authors:  María Reyes Plata; Ana María Contento; Angel Ríos
Journal:  Sensors (Basel)       Date:  2010-03-24       Impact factor: 3.576

Review 4.  Analytical applications of MIPs in diagnostic assays: future perspectives.

Authors:  Thomas S Bedwell; Michael J Whitcombe
Journal:  Anal Bioanal Chem       Date:  2015-11-21       Impact factor: 4.142

5.  Development of Silica Nanoparticle Supported Imprinted Polymers for Selective Lysozyme Recognition.

Authors:  Anika Kotyrba; Mehmet Dinc; Boris Mizaikoff
Journal:  Nanomaterials (Basel)       Date:  2021-12-03       Impact factor: 5.076

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.