INTRODUCTION: This study was designed to investigate the antimicrobial and physical properties of orthodontic composite resin modified by the addition of antimicrobial agents. METHODS: Unite bonding adhesive (3M Unitek, Monrovia, Calif), a chemically cured composite resin, modified by the addition of benzalkonium chloride (BAC), chlorhexidine, and triclosan in concentrations of 0.1 wt%, 0.2 wt%, and 0.3 wt%, respectively, was formed into tablets for testing. The tablets of each group and a control group were subjected to the agar plate diffusion test to measure the zone of bacterial inhibition. In addition, they were incubated for 24 hours in tryptic soy broth inoculated with Streptococcus mutans and examined for bacterial growth. A total of 80 extracted premolars were collected and divided into 2 sets of 40 teeth each. Stainless steel Begg brackets were bonded by using control and experimental composites. A universal testing machine was used to determine shear bond strength. The first set of teeth was tested after 24 hours and the second set after 25 days of storage in distilled water. Time-dependent release of antimicrobial agents from the modified composites was monitored spectrophotometrically. RESULTS AND CONCLUSIONS: The findings indicated that (1) addition of BAC to the orthodontic composite resin enhanced its antimicrobial properties, (2) there was no significant difference in the bond strengths of the control and the experimental resin tested after 24 hours and 25 days, and (3) maximum release of BAC from the modified resin was higher than that of chlorhexidine or triclosan, and was much higher than the minimum inhibitory concentration level.
RCT Entities:
INTRODUCTION: This study was designed to investigate the antimicrobial and physical properties of orthodontic composite resin modified by the addition of antimicrobial agents. METHODS: Unite bonding adhesive (3M Unitek, Monrovia, Calif), a chemically cured composite resin, modified by the addition of benzalkonium chloride (BAC), chlorhexidine, and triclosan in concentrations of 0.1 wt%, 0.2 wt%, and 0.3 wt%, respectively, was formed into tablets for testing. The tablets of each group and a control group were subjected to the agar plate diffusion test to measure the zone of bacterial inhibition. In addition, they were incubated for 24 hours in tryptic soy broth inoculated with Streptococcus mutans and examined for bacterial growth. A total of 80 extracted premolars were collected and divided into 2 sets of 40 teeth each. Stainless steel Begg brackets were bonded by using control and experimental composites. A universal testing machine was used to determine shear bond strength. The first set of teeth was tested after 24 hours and the second set after 25 days of storage in distilled water. Time-dependent release of antimicrobial agents from the modified composites was monitored spectrophotometrically. RESULTS AND CONCLUSIONS: The findings indicated that (1) addition of BAC to the orthodontic composite resin enhanced its antimicrobial properties, (2) there was no significant difference in the bond strengths of the control and the experimental resin tested after 24 hours and 25 days, and (3) maximum release of BAC from the modified resin was higher than that of chlorhexidine or triclosan, and was much higher than the minimum inhibitory concentration level.
Authors: Marcel M Farret; Eduardo Martinelli de Lima; Eduardo G Mota; Hugo M S Oshima; Valdir Barth; Silvia D de Oliveira Journal: Angle Orthod Date: 2011-02-07 Impact factor: 2.079