Literature DB >> 17377217

The effects of strain rate and low-gamma irradiation on the compressive properties of UHMWPE.

Koichi Kobayashi1, Toshihiko Kakinoki, Makoto Sakamoto, Yuji Tanabe.   

Abstract

The effects of strain rate and low-gamma irradiation on the compressive properties of ultra-high molecular-weight polyethylene (UHMWPE) were investigated. Gamma irradiation was performed at 30 kGy in nitrogen or at 29 kGy in air without post-irradiation treatment. Quasi-static and impact compressive tests using the split-Hopkinson pressure-bar technique were performed to measure stress-strain relations up to a true strain of 8% at strain rates of between 0.0004 and 260 s(-1). For both unirradiated and gamma-irradiated UHMWPE specimens, an increase in the strain rate significantly increased the Young's modulus and the 0.5% yield stress. Gamma irradiation in air significantly increased the Young's modulus, as determined by quasi-static and impact compressive testing, and the 0.5% yield stress, as determined by impact compressive testing. The strain-rate dependence in the power-law relationship was similar to that observed for strain rates ranging from 0.02 to 0.10 s(-1) (Kurtz et al., Biomaterials 23, 2002, pp. 3681-3697).

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 17377217

Source DB:  PubMed          Journal:  Biomed Mater Eng        ISSN: 0959-2989            Impact factor:   1.300


  2 in total

1.  The effect of insert conformity and material on total knee replacement wear.

Authors:  Abdellatif Abdelgaied; Claire L Brockett; Feng Liu; Louise M Jennings; Zhongmin Jin; John Fisher
Journal:  Proc Inst Mech Eng H       Date:  2013-12-02       Impact factor: 1.617

2.  Computational wear prediction of insert conformity and material on mobile-bearing unicompartmental knee arthroplasty.

Authors:  Y-G Koh; J-A Lee; H-Y Lee; H-J Kim; K-T Kang
Journal:  Bone Joint Res       Date:  2019-12-03       Impact factor: 5.853

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.