Literature DB >> 17376691

Beta-tricalcium phosphate plugs for press-fit fixation in ACL reconstruction--a mechanical analysis in bovine bone.

Hermann O Mayr1, Robert Hube, Anke Bernstein, Alexander B Seibt, Werner Hein, Ruediger von Eisenhart-Rothe.   

Abstract

BACKGROUND: The goal of this study was to test fixation properties of microporous pure beta-tricalcium phosphate (TCP) plugs (porosity 40%) for press-fit fixation of the ACL graft using patellar tendons with and without bone blocks. We set out to establish whether it is possible, in this way, to obtain results comparable with those of interference screw fixation of bone-tendon-bone (BTB) grafts in terms of cyclic loading and load-to-failure.
METHODS: In a bovine model 30 ACL grafts were fixed in tibial drill holes, divided into three groups: 10 BTB grafts fixed with TCP press-fit plugs (7x25 mm), 10 pure patellar tendon grafts with TCP press-fit plugs (7x25 mm), and 10 BTB grafts with metal interference screws (7x25 mm). All grafts were tested by cyclic loading (50-200 N) and loaded until failure in a tensiometer.
RESULTS: Under cyclic loading one interference screw fixation failed. None of the TCP plug fixations failed. After 1500 cycles the displacement of the graft in the drill hole for BTB fixed with screws was 3.6+/-7.8 mm, for BTB/TCP plugs 1.6+/-3.4 mm, and for the pure tendon/TCP grafts 1.4+/-0.4 mm. Regarding cyclic loading the pure tendon/TCP system was significantly superior to BTB (p=0.007). The load-to-failure for the BTB/interference screw group was 908+/-539 N with a stiffness of 94+/-36 N/mm, 936+/-245 N for the BTB/TCP cylinder group with a stiffness of 98+/-12 N/mm, and 673+/-159 N for the pure tendon/TCP group with a stiffness of 117+/-9 N/mm. In terms of pull-out load the BTB/TCP system was significantly better than the pure tendon/TCP group (p=0.011). However, pure tendon/TCP grafts achieved significantly greater stiffness (p=0.002) than the BTB system.
CONCLUSION: Press-fit fixation with microporous pure beta-TCP plugs of BTB grafts or patellar tendon grafts without bone blocks for ACL reconstruction leads to primary stability comparable with that achieved by fixation with metal interference screws in case of BTB grafts.

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 17376691     DOI: 10.1016/j.knee.2007.01.006

Source DB:  PubMed          Journal:  Knee        ISSN: 0968-0160            Impact factor:   2.199


  5 in total

1.  Graft-dependent differences in the ligamentization process of anterior cruciate ligament grafts in a sheep trial.

Authors:  Hermann O Mayr; Amelie Stoehr; Markwart Dietrich; Rüdiger von Eisenhart-Rothe; Robert Hube; Senta Senger; Norbert P Suedkamp; Anke Bernstein
Journal:  Knee Surg Sports Traumatol Arthrosc       Date:  2011-09-28       Impact factor: 4.342

2.  Biomechanical testing of implant free wedge shaped bone block fixation for bone patellar tendon bone anterior cruciate ligament reconstruction in a bovine model.

Authors:  Charles A Willis-Owen; Trevor C Hearn; Gregory C Keene; John J Costi
Journal:  J Orthop Surg Res       Date:  2010-09-02       Impact factor: 2.359

Review 3.  [Complications after cruciate ligament reconstruction].

Authors:  H O Mayr; C Zeiler
Journal:  Orthopade       Date:  2008-11       Impact factor: 1.087

4.  A prospective randomized study of ACL-reconstructions using bone-patellar tendon-bone grafts fixed with bioabsorbable or metal interference screws.

Authors:  Jon Olav Drogset; Lene Granrud Straume; Ingrid Bjørkmo; Gunnar Myhr
Journal:  Knee Surg Sports Traumatol Arthrosc       Date:  2011-01-14       Impact factor: 4.342

5.  Sustained release of rhBMP-2 from microporous tricalciumphosphate using hydrogels as a carrier.

Authors:  Steffen Kissling; Michael Seidenstuecker; Ingo H Pilz; Norbert P Suedkamp; Hermann O Mayr; Anke Bernstein
Journal:  BMC Biotechnol       Date:  2016-05-20       Impact factor: 2.563

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.