Literature DB >> 17331527

Sorption of arsenic, cadmium, and lead by chars produced from fast pyrolysis of wood and bark during bio-oil production.

Dinesh Mohan1, Charles U Pittman, Mark Bricka, Fran Smith, Ben Yancey, Javeed Mohammad, Philip H Steele, Maria F Alexandre-Franco, Vicente Gómez-Serrano, Henry Gong.   

Abstract

Bio-char by-products from fast wood/bark pyrolyses, were investigated as adsorbents for the removal of the toxic metals (As(3+), Cd(2+), Pb(2+)) from water. Oak bark, pine bark, oak wood, and pine wood chars were obtained from fast pyrolysis at 400 and 450 degrees C in an auger-fed reactor and characterized. A commercial activated carbon was also investigated for comparison. Chars were sieved (>600, 600-250, 250-177, 177-149, and <149 microm) and the particle size fraction from 600 to 250 microm was used without further modification for all studies unless otherwise stated. Sorption studies were performed at different temperatures, pHs, and solid to liquid ratios in the batch mode. Maximum adsorption occurred over a pH range 3-4 for arsenic and 4-5 for lead and cadmium. Kinetic studies yielded an optimum equilibrium time of 24 h with an adsorbent dose of 10 g/L and concentration approximately 100 mg/L for lead and cadmium. Sorption isotherms studies were conducted in broad concentration ranges (1-1000 ppb for arsenic, 1x10(-5)-5x10(-3) M for lead and cadmium). Oak bark out-performed the other chars and nearly mimicked Calgon F-400 adsorption for lead and cadmium. In an aqueous lead solution with initial concentration of 4.8x10(-4) M, both oak bark and Calgon F-400 (10 g/L) removed nearly 100% of the heavy metal. Oak bark (10 g/L) also removed about 70% of arsenic and 50% of cadmium from aqueous solutions. Varying temperatures (e.g., 5, 25, and 40 degrees C) were used to determine the effect of temperatures. The equilibrium data were modeled with the help of Langmuir and Freundlich equations. Overall, the data are well fitted with both the models, with a slight advantage for Langmuir model. The oak bark char's ability to remove Pb(II) and Cd(II) is remarkable when considered in terms of the amount of metal adsorbed per unit surface area (0.5157 mg/m(2) for Pb(II) and 0.213 mg/m(2) for Cd(II) versus that of commercial activated carbon.

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 17331527     DOI: 10.1016/j.jcis.2007.01.020

Source DB:  PubMed          Journal:  J Colloid Interface Sci        ISSN: 0021-9797            Impact factor:   8.128


  47 in total

1.  Biosorption of arsenic from aqueous solution using dye waste.

Authors:  Shubha Nigam; Padma S Vankar; Krishna Gopal
Journal:  Environ Sci Pollut Res Int       Date:  2012-06-02       Impact factor: 4.223

2.  Use of fly ash agglomerates for removal of arsenic.

Authors:  Izabela Polowczyk; Anna Bastrzyk; Tomasz Koźlecki; Wojciech Sawiński; Piotr Rudnicki; Adam Sokołowski; Zygmunt Sadowski
Journal:  Environ Geochem Health       Date:  2010-04-10       Impact factor: 4.609

3.  Sorption of halogenated phenols and pharmaceuticals to biochar: affecting factors and mechanisms.

Authors:  Seok-Young Oh; Yong-Deuk Seo
Journal:  Environ Sci Pollut Res Int       Date:  2015-02-18       Impact factor: 4.223

4.  Removal efficiency of As(V) and Sb(III) in contaminated neutral drainage by Fe-loaded biochar.

Authors:  Iuliana Laura Calugaru; Carmen Mihaela Neculita; Thomas Genty; Gérald J Zagury
Journal:  Environ Sci Pollut Res Int       Date:  2019-02-05       Impact factor: 4.223

5.  Effect of Fe-functionalized biochar on toxicity of a technosol contaminated by Pb and As: sorption and phytotoxicity tests.

Authors:  Manhattan Lebrun; Florie Miard; Sullivan Renouard; Romain Nandillon; Gabriella S Scippa; Domenico Morabito; Sylvain Bourgerie
Journal:  Environ Sci Pollut Res Int       Date:  2018-10-01       Impact factor: 4.223

6.  The characteristics of waste Saccharomyces cerevisiae biosorption of arsenic(III).

Authors:  Yunhai Wu; Yajun Wen; Jianxin Zhou; Qi Dai; Yunying Wu
Journal:  Environ Sci Pollut Res Int       Date:  2012-03-24       Impact factor: 4.223

7.  Removal of Cu, Zn, and Cd from aqueous solutions by the dairy manure-derived biochar.

Authors:  Xiaoyun Xu; Xinde Cao; Ling Zhao; Hailong Wang; Hongran Yu; Bin Gao
Journal:  Environ Sci Pollut Res Int       Date:  2012-04-05       Impact factor: 4.223

8.  Simultaneously removal of inorganic arsenic species from stored rainwater in arsenic endemic area by leaves of Tecomella undulata: a multivariate study.

Authors:  Kapil Dev Brahman; Tasneem Gul Kazi; Hassan Imran Afridi; Jameel Ahmed Baig; Muhammad Ishaque Abro; Sadaf Sadia Arain; Jamshed Ali; Sumaira Khan
Journal:  Environ Sci Pollut Res Int       Date:  2016-04-20       Impact factor: 4.223

9.  Adsorption characteristics of Pb2+ on natural black carbon extracted from different grain-size lake sediments.

Authors:  Tao Ding; Changwei Lü; Jiang He; Boyi Zhao; Jinghua Wang; Haijun Zhou; Yu Zhang
Journal:  Environ Sci Pollut Res Int       Date:  2016-09-15       Impact factor: 4.223

10.  Arsenate removal from aqueous solution by siderite synthesized under high temperature and high pressure.

Authors:  Zhilin Yang; Wei Xiu; Huaming Guo; Fulan Li
Journal:  Environ Sci Pollut Res Int       Date:  2017-07-04       Impact factor: 4.223

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.