Partial removal of PCDD/Fs, coplanar PCBS, and PCBS from municipal solid waste incineration fly ash by a column flotation process.

Municipal solid waste incineration (MSWI) fly ash has recently attracted much attention because of its large quantity and enrichment of high toxic combustion generating organohalogen contaminants such as polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), coplanar polychlorinated biphenyls (coplanar PCBs), and polychlorinated biphenyls (PCBs). Since the organohalogen contaminants in MSWI fly ash are known to be enriched in the unburnt carbon (UC) fraction, the organohalogen contaminants can therefore be removed by the removal of UC. In this research, we used a modified column flotation technique to remove the organic contaminants from MSWI fly ash. UC was removed for 27.7% under the flotation condition without chemical flotation aids. The removal efficiencies of UC, PCDD/Fs, coplanar PCBs, and PCBs are further improved by adding flotation aids during the flotation process. UC was removed for 49.0% by adding a collector assistant with a HLB value of 13.5 and a concentration in the kerosene of 3% during the flotation process. In addition,the UC removal efficiencies are increased with the decrease of the diameter of the micropores in the gas spargers. By optimizing the flotation condition, 41.9% total PCDD/Fs, 40.8% coplanar PCBs, and 44.1% PCBs with 64.0% UC have been successfully removed from MSWI fly ash. The total toxic equivalent (TEQ) of the fly ash was decreased from 6.2 ng/g to 4.2 ng/g in the residue.