Flow perfusion improves seeding of tissue engineering scaffolds with different architectures.

Engineered bone grafts have been generated in static and dynamic systems by seeding and culturing osteoblastic cells on 3-D scaffolds. Seeding determines initial cellularity and cell spatial distribution throughout the scaffold, and affects cell-matrix interactions. Static seeding often yields low seeding efficiencies and poor cell distributions; thus creating a need for techniques that can improve these parameters. We have evaluated the effect of oscillating flow perfusion on seeding efficiency and spatial distribution of MC3T3-E1 pre-osteoblastic cells in fibrous polystyrene matrices (20, 35 and 50-microm fibers) and foams prepared by salt leaching, using as controls statically seeded scaffolds. An additional control was investigated where static seeding was followed by unidirectional perfusion. Oscillating perfusion resulted in the most efficient technique by yielding higher seeding efficiencies, more homogeneous distribution and stronger cell-matrix interactions. Cell surface density increased with inoculation cell number and then reached a maximum, but significant detachment occurred at greater flow rates. Oxygen plasma treatment of the fibers greatly improved seeding efficiency. Having similar porosity and dimensions, fibrous matrices yielded higher cell surface densities than foams. Fluorescence microscopy and histological analyses in polystyrene and PLLA scaffolds demonstrated that perfusion seeding produced more homogeneous cell distribution, with fibrous matrices presenting greater uniformity than the foams.