Literature DB >> 17182918

A biomechanics-based rupture potential index for abdominal aortic aneurysm risk assessment: demonstrative application.

Jonathan P Vande Geest1, Elena S Di Martino, Ajay Bohra, Michel S Makaroun, David A Vorp.   

Abstract

Abdominal aortic aneurysms (AAAs) can typically remain stable until the strength of the aortic wall is unable to withstand the forces acting on it as a result of the luminal blood pressure, resulting in AAA rupture. The clinical treatment of AAA patients presents a dilemma for the surgeon: surgery should only be recommended when the risk of rupture of the AAA outweighs the risks associated with the interventional procedure. Since AAA rupture occurs when the stress acting on the wall exceeds its strength, the assessment of AAA rupture should include estimates of both wall stress and wall strength distributions. The present work details a method for noninvasively assessing the rupture potential of AAAs using patient-specific estimations the rupture potential index (RPI) of the AAA, calculated as the ratio of locally acting wall stress to strength. The RPI was calculated for thirteen AAAs, which were broken up into ruptured (n = 8 and nonruptured (n = 5) groups. Differences in peak wall stress, minimum strength and maximum RPI were compared across groups. There were no statistical differences in the maximum transverse diameters (6.8 +/- 0.3 cm vs. 6.1 +/- 0.5 cm, p = 0.26) or peak wall stress (46.0 +/- 4.3 vs. 49.9 +/- 4.0 N/cm(2), p = 0.62) between groups. There was a significant decrease in minimum wall strength for ruptured AAA (81.2 +/- 3.9 and 108.3 +/- 10.2 N/cm(2), p = 0.045). While the differences in RPI values (ruptured = 0.48 +/- 0.05 vs. nonruptured = 0.36 +/- 0.03, respectively; p = 0.10) did not reach statistical significance, the p-value for the peak RPI comparison was lower than that for both the maximum diameter (p = 0.26) and peak wall stress (p = 0.62) comparisons. This result suggests that the peak RPI may be better able to identify those AAAs at high risk of rupture than maximum diameter or peak wall stress alone. The clinical relevance of this method for rupture assessment has yet to be validated, however, its success could aid clinicians in decision making and AAA patient management.

Entities:  

Mesh:

Year:  2006        PMID: 17182918     DOI: 10.1196/annals.1383.046

Source DB:  PubMed          Journal:  Ann N Y Acad Sci        ISSN: 0077-8923            Impact factor:   5.691


  31 in total

1.  Quantitative assessment of abdominal aortic aneurysm geometry.

Authors:  Judy Shum; Giampaolo Martufi; Elena Di Martino; Christopher B Washington; Joseph Grisafi; Satish C Muluk; Ender A Finol
Journal:  Ann Biomed Eng       Date:  2010-10-02       Impact factor: 3.934

2.  Computational Growth and Remodeling of Abdominal Aortic Aneurysms Constrained by the Spine.

Authors:  Mehdi Farsad; Shahrokh Zeinali-Davarani; Jongeun Choi; Seungik Baek
Journal:  J Biomech Eng       Date:  2015-09       Impact factor: 2.097

3.  Fourier transform infrared spectroscopy to quantify collagen and elastin in an in vitro model of extracellular matrix degradation in aorta.

Authors:  Rabee Cheheltani; Cushla M McGoverin; Jayashree Rao; David A Vorp; Mohammad F Kiani; Nancy Pleshko
Journal:  Analyst       Date:  2014-04-24       Impact factor: 4.616

Review 4.  Hemodynamic influences on abdominal aortic aneurysm disease: Application of biomechanics to aneurysm pathophysiology.

Authors:  Monica M Dua; Ronald L Dalman
Journal:  Vascul Pharmacol       Date:  2010-03-25       Impact factor: 5.773

5.  Prior Distributions of Material Parameters for Bayesian Calibration of Growth and Remodeling Computational Model of Abdominal Aortic Wall.

Authors:  Sajjad Seyedsalehi; Liangliang Zhang; Jongeun Choi; Seungik Baek
Journal:  J Biomech Eng       Date:  2015-10       Impact factor: 2.097

6.  Investigation of material modeling in fluid-structure interaction analysis of an idealized three-layered abdominal aorta: aneurysm initiation and fully developed aneurysms.

Authors:  Fatma Gulden Simsek; Young W Kwon
Journal:  J Biol Phys       Date:  2015-01-27       Impact factor: 1.365

7.  On the computation of in vivo transmural mean stress of patient-specific aortic wall.

Authors:  Minliang Liu; Liang Liang; Haofei Liu; Ming Zhang; Caitlin Martin; Wei Sun
Journal:  Biomech Model Mechanobiol       Date:  2018-11-09

Review 8.  Biomechanical Rupture Risk Assessment: A Consistent and Objective Decision-Making Tool for Abdominal Aortic Aneurysm Patients.

Authors:  T Christian Gasser
Journal:  Aorta (Stamford)       Date:  2016-04-01

9.  Regional structural and biomechanical alterations of the ovine main pulmonary artery during postnatal growth.

Authors:  Bahar Fata; Christopher A Carruthers; Gregory Gibson; Simon C Watkins; Danielle Gottlieb; John E Mayer; Michael S Sacks
Journal:  J Biomech Eng       Date:  2013-02       Impact factor: 2.097

Review 10.  Biochemomechanics of intraluminal thrombus in abdominal aortic aneurysms.

Authors:  J S Wilson; L Virag; P Di Achille; I Karsaj; J D Humphrey
Journal:  J Biomech Eng       Date:  2013-02       Impact factor: 2.097

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.