Literature DB >> 17165759

Nonlithographic fabrication of microfluidic devices.

Valentine I Vullev1, Jiandi Wan, Volkmar Heinrich, Pavel Landsman, Paul E Bower, Bing Xia, Brent Millare, Guilford Jones.   

Abstract

A facile nonlithographic method for expedient fabrication of microfluidic devices of poly(dimethylsiloxane) is described. Positive-relief masters for the molds are directly printed on smooth substrates. For the formation of connecting channels and chambers inside the polymer components of the microfluidic devices, cavity-forming elements are adhered to the surfaces of the masters. Using this nonlithographic approach, we fabricated microfluidic devices for detection of bacterial spores on the basis of enhancement of the emission of terbium (III) ions.

Entities:  

Mesh：

Substances：

Year:  2006        PMID： 17165759     DOI： 10.1021/ja061776o

Source DB:  PubMed          Journal:  J Am Chem Soc        ISSN： 0002-7863            Impact factor:   15.419


  10 in total

1.  A simple method of fabricating mask-free microfluidic devices for biological analysis.

Authors:  Xin Yi; Rimantas Kodzius; Xiuqing Gong; Kang Xiao; Weijia Wen
Journal:  Biomicrofluidics       Date:  2010-09-07       Impact factor: 2.800

2.  Amyloid histology stain for rapid bacterial endospore imaging.

Authors:  Bing Xia; Srigokul Upadhyayula; Vicente Nuñez; Pavel Landsman; Samuel Lam; Harbani Malik; Sharad Gupta; Mohammad Sarshar; Jingqiu Hu; Bahman Anvari; Guilford Jones; Valentine I Vullev
Journal:  J Clin Microbiol       Date:  2011-06-08       Impact factor: 5.948

Review 3.  Current Advancements and Future Road Map to Develop ASSURED Microfluidic Biosensors for Infectious and Non-Infectious Diseases.

Authors:  Tanu Bhardwaj; Lakshmi Narashimhan Ramana; Tarun Kumar Sharma
Journal:  Biosensors (Basel)       Date:  2022-05-20

4.  Comparison of the analytical performance of electrophoresis microchannels fabricated in PDMS, glass, and polyester-toner.

Authors:  Wendell Karlos Tomazelli Coltro; Susan M Lunte; Emanuel Carrilho
Journal:  Electrophoresis       Date:  2008-12       Impact factor: 3.535

Review 5.  From cleanroom to desktop: emerging micro-nanofabrication technology for biomedical applications.

Authors:  Tingrui Pan; Wei Wang
Journal:  Ann Biomed Eng       Date:  2010-12-14       Impact factor: 3.934

6.  Milling Positive Master for Polydimethylsiloxane Microfluidic Devices: The Microfabrication and Roughness Issues.

Authors:  Zhizhi Zhou; Dong Chen; Xiang Wang; Jiahuan Jiang
Journal:  Micromachines (Basel)       Date:  2017-09-21       Impact factor: 2.891

7.  Non-Lithographic Silicon Micromachining Using Inkjet and Chemical Etching.

Authors:  Sasha Hoshian; Cristina Gaspar; Teemu Vasara; Farzin Jahangiri; Ville Jokinen; Sami Franssila
Journal:  Micromachines (Basel)       Date:  2016-12-08       Impact factor: 2.891

Review 8.  Print-and-peel fabrication for microfluidics: what's in it for biomedical applications?

Authors:  Marlon S Thomas; Brent Millare; Joseph M Clift; Duoduo Bao; Connie Hong; Valentine I Vullev
Journal:  Ann Biomed Eng       Date:  2009-11-07       Impact factor: 3.934

9.  Microfluidics based phantoms of superficial vascular network.

Authors:  Long Luu; Patrick A Roman; Scott A Mathews; Jessica C Ramella-Roman
Journal:  Biomed Opt Express       Date:  2012-05-14       Impact factor: 3.732

10.  Predicting Corrosion Delamination Failure in Active Implantable Medical Devices: Analytical Model and Validation Strategy.

Authors:  Adrian Onken; Helmut Schütte; Anika Wulff; Heidi Lenz-Strauch; Michaela Kreienmeyer; Sabine Hild; Thomas Stieglitz; Stefan Gassmann; Thomas Lenarz; Theodor Doll
Journal:  Bioengineering (Basel)       Date:  2021-12-31
  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.