Literature DB >> 17120220

Thermal oxidation enhances early interactions between human osteoblasts and alumina blasted Ti6Al4V alloy.

L Saldaña1, V Barranco, J L González-Carrasco, M Rodríguez, L Munuera, N Vilaboa.   

Abstract

Oxidation of Ti6Al4V at 500 degrees C for 1 h in air results in the formation of an outer ceramic layer that improves osteoblast behavior and decreases Ti and Al ion release. In this work, alumina blasted Ti6Al4V alloy has been thermally treated and its in vitro biocompatibility has been assessed. Roughness of the blasted alloy was not found significantly altered after heat treatment while chemical surface analysis indicated an increase in stable TiO(2) and Al(2)O(3) oxides. Cell attachment, spreading, cytoskeleton organization as well as cell proliferation, viability, and procollagen I peptide secretion of human primary osteoblasts, impaired on alumina blasted Ti6Al4V, were found to be greatly enhanced on the thermally oxidized blasted alloy. Other informative markers of the osteoblastic phenotype such as alkaline phosphatase, osteocalcin, osteoprotegerin, and mineralized nodule formation were evaluated and indicated that osteoblasts responded at the same extent on untreated and thermally treated blasted alloys. Taken together, our in vitro results indicate that thermal oxidation of alumina blasted Ti6Al4V may favor successful osseointegration by promoting early interactions of osteoblastic cells and the modified surface alloy. Copyright 2006 Wiley Periodicals, Inc.

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 17120220     DOI: 10.1002/jbm.a.30994

Source DB:  PubMed          Journal:  J Biomed Mater Res A        ISSN: 1549-3296            Impact factor:   4.396


  6 in total

1.  Grit blasting of medical stainless steel: implications on its corrosion behavior, ion release and biocompatibility.

Authors:  J C Galván; L Saldaña; M Multigner; A Calzado-Martín; M Larrea; C Serra; N Vilaboa; J L González-Carrasco
Journal:  J Mater Sci Mater Med       Date:  2012-01-22       Impact factor: 3.896

Review 2.  Nanoscale surface modifications of medically relevant metals: state-of-the art and perspectives.

Authors:  Fabio Variola; John B Brunski; Giovanna Orsini; Paulo Tambasco de Oliveira; Rima Wazen; Antonio Nanci
Journal:  Nanoscale       Date:  2010-10-26       Impact factor: 7.790

3.  In vitro evaluation of human osteoblast adhesion to a thermally oxidized gamma-TiAl intermetallic alloy of composition Ti-48Al-2Cr-2Nb (at.%).

Authors:  Samir A Bello; Idaris de Jesús-Maldonado; Esteban Rosim-Fachini; Paul A Sundaram; Nanette Diffoot-Carlo
Journal:  J Mater Sci Mater Med       Date:  2010-02-17       Impact factor: 3.896

4.  A bioactive polymer grafted on titanium oxide layer obtained by electrochemical oxidation. Improvement of cell response.

Authors:  Gérard Hélary; Flavie Noirclère; Josselin Mayingi; Brigitte Bacroix; Véronique Migonney
Journal:  J Mater Sci Mater Med       Date:  2009-10-20       Impact factor: 3.896

5.  Bioactive polymer grafting onto titanium alloy surfaces.

Authors:  A Michiardi; G Hélary; P-C T Nguyen; L J Gamble; F Anagnostou; D G Castner; V Migonney
Journal:  Acta Biomater       Date:  2009-09-04       Impact factor: 8.947

6.  Nanoscale Surface Modifications of Orthopaedic Implants: State of the Art and Perspectives.

Authors:  Rmt Staruch; M F Griffin; Pem Butler
Journal:  Open Orthop J       Date:  2016-12-30
  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.