Monitoring of polychlorinated dibenzo-p-dioxins and dibenzofurans, dioxin-like PCBs and polycyclic aromatic hydrocarbons in food and feed samples from Ismailia city, Egypt.

Concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyl (PCBs) and polycyclic aromatic hydrocarbons (PAHs) have been determined using GC/HRMS in food (butter, seafood and meat) and feed samples (chicken, cattle and fish) purchased from Ismailia city, Egypt. PCDD/F concentrations in food samples ranged between 0.12 and 3.35 pg WHO TEQ/g wet w, while those in feed samples were between 0.08 and 0.2 pg WHO TEQ/g dry w. Levels of PCB TEQ ranged from 0.14 to 3.2 pg/g wet w in the food samples. The feed samples have an average of 0.35 pg PCB TEQ /g dry w. In this study, butter samples showed the highest contamination levels of PCDD/Fs and PCBs. The PCBs contribution to the total TEQ was on average 63% in seafood and on average 49% for meat and butter. The highest contamination levels of PCDD/Fs and PCBs were found in butter samples. The butter TEQ content is several times higher than that reported in all EU countries and exceeded the EU limits, while the PCDD/F levels in seafood and the feed samples is far below the current EU limit. Generally, congener profiles in the food samples reflect the non-industrialized nature of the city and suggest solid waste burning as a significant source of emission. Nevertheless, the profiles for butter suggest an impact from various sources. In the case of the sum of 16 PAH contamination levels in food samples were in the range of 11.7-154.3 ng/g wet w and feed samples had a range of 116-393 ng/g dry w. Benzo(a)pyrene (BaP) has been detected in the range of 0.05-3.29 ng/g wet w in the food samples; butter showed the highest contamination which exceeded the EU standard set for fats and oil. Fingerprints of PAHs suggested both petrogenic and pyrolytic sources of contamination.