Sun-Ho Lee1, Joo-Kyung Sung. 1. Department of Neurosurgery, School of Medicine, Kyungpook National University, Daegu 700-721, Republic of Korea.
Abstract
BACKGROUND: Anterior screw fixation provides the best anatomical and functional results for odontoid process fracture (type II and "shallow" type III) with intact transverse ligament. The purpose of this study is to evaluate the clinical results of the 4.5-mm-diameter cannulated Herbert screw in the anterior odontoid fixation. METHODS: From May 2003 to November 2005, 20 consecutive cases of types II and III odontoid process fractures were treated with anterior screw fixation using a 4.5-mm Herbert screw. The Herbert screw has double threads, with different pitches on the distal and proximal ends. It has no head, so it can be inserted through articular cartilage and buried below bone surface. RESULTS: There were 16 male and 4 female patients whose ages ranged from 15 to 76 years (mean, 43.7 years). The fracture type was type II-A in 4 patients, II-N in 9 patients, II-P in 5 patients, and III in 2 patients. The range of follow-up was 3 to 36 months (mean, 18.6 months). There were an overall bone fusion rate in 17 cases (85%), fibrous union in 1 (5%), and nonunion in 2 (10%). Overall, complication unrelated to hardware occurred in the one (postoperative dysphagia) without complication-related hardware failure. CONCLUSIONS: The Herbert screw is very useful in anterior fixation for types II and III odontoid process fractures. This series showed successful clinical results comparable with that of the 3.5-mm cannulated cancellous screw and distinct advantages over conventional screws in the aspect of biomechanical properties and less invasiveness.
BACKGROUND: Anterior screw fixation provides the best anatomical and functional results for odontoid process fracture (type II and "shallow" type III) with intact transverse ligament. The purpose of this study is to evaluate the clinical results of the 4.5-mm-diameter cannulated Herbert screw in the anterior odontoid fixation. METHODS: From May 2003 to November 2005, 20 consecutive cases of types II and III odontoid process fractures were treated with anterior screw fixation using a 4.5-mm Herbert screw. The Herbert screw has double threads, with different pitches on the distal and proximal ends. It has no head, so it can be inserted through articular cartilage and buried below bone surface. RESULTS: There were 16 male and 4 female patients whose ages ranged from 15 to 76 years (mean, 43.7 years). The fracture type was type II-A in 4 patients, II-N in 9 patients, II-P in 5 patients, and III in 2 patients. The range of follow-up was 3 to 36 months (mean, 18.6 months). There were an overall bone fusion rate in 17 cases (85%), fibrous union in 1 (5%), and nonunion in 2 (10%). Overall, complication unrelated to hardware occurred in the one (postoperative dysphagia) without complication-related hardware failure. CONCLUSIONS: The Herbert screw is very useful in anterior fixation for types II and III odontoid process fractures. This series showed successful clinical results comparable with that of the 3.5-mm cannulated cancellous screw and distinct advantages over conventional screws in the aspect of biomechanical properties and less invasiveness.
Authors: Ivan Lvov; Andrey Grin; Aleksandr Talypov; Ivan Godkov; Anton Kordonskiy; Ulugbek Khushnazarov; Vladimir Smirnov; Vladimir Krylov Journal: Eur Spine J Date: 2020-06-15 Impact factor: 3.134
Authors: Michael Mayer; Juliane Zenner; Alexander Auffarth; Jörg Atzwanger; Franz Romeder; Wolfgang Hitzl; Stefan Lederer; Herbert Resch; Heiko Koller Journal: Eur Spine J Date: 2011-05-24 Impact factor: 3.134
Authors: Arvind G Kulkarni; Siddharth M Shah; Ruchira A Marwah; Prasad B Hanagandi; Inder R Talwar Journal: Indian J Orthop Date: 2013-05 Impact factor: 1.251