Position of mandibular joint surface in cenrric relation.

The position of mandible in centric relation is the initial position in prosthodontic rehabilitation. This fact is especially significant today when, due to development of implantology, the use of osseointegrated prostheses is increasingly discussed. The aim of the study is to define if the peak of the articulating surface of mandible in centric relation position is directed towards the zenith of madibular fossa, or is in the retroposition. The research was conducted on macerated human sculls in anthropometric system, based on objective measuring techniques and methods. The results showed that if the zenith of mandibular fossa is determined according to the vertical line of the Frankfurt horizontal, the peak of the mandibular caput articulating surface is in retroposition. The relation of the lower joint surface to the mandibular fossa zenith is the same on both right and left side. The correlation coefficient demonstrates a high correlation between the sides, highly significant with probability level of p<0,01. If the peak of mandibular fossa is determined according to the vertical line of the Frankfurt horizontal, the peak of the articulating surface of mandibular caput is in retroposition in relation to the peak of the upper jaw surface. This original scientific work will help better understanding of x-ray analysis and understanding of relationship of TMJ surfaces, what is necessary for treatment of TMD and occlusal imbalances.