Literature DB >> 16983653

Biocompatibility evaluation of surface-treated AISI 316L austenitic stainless steel in human cell cultures.

M Martinesi1, S Bruni, M Stio, C Treves, T Bacci, F Borgioli.   

Abstract

The effects of AISI 316L austenitic stainless steel, tested in untreated state or subjected to glow-discharge nitriding (at 10 or 20 hPa) and nitriding + post-oxidizing treatments, on human umbilical vein endothelial cells (HUVEC) and on peripheral blood mononuclear cells (PBMC) were evaluated. All the treated samples showed a better corrosion resistance in PBS and higher surface hardness in comparison with the untreated alloy. In HUVEC put in contact for 72 h with the sample types, proliferation and apoptosis decreased and increased, respectively, in the presence of the nitrided + post-oxidized samples, while only slight differences in cytokine (TNF-alpha, IL-6, and TGF-beta1) release were registered. Intercellular adhesion molecule-1 (ICAM-1) increased in HUVEC incubated with all the treated samples, while vascular cell adhesion molecule-1 (VCAM-1) and E-selectin increased in the presence of all the sample types. PBMC incubated for 48 h with the samples showed a decrease in proliferation and an increase in apoptosis in the presence of the untreated samples and the nitrided + post-oxidized ones. All the sample types induced a remarkable increase in TNF-alpha and IL-6 release in PBMC culture medium, while only the untreated sample and the nitrided at 10 hPa induced an increase in ICAM-1 expression. In HUVEC cocultured with PBMC, previously put in contact with the treated AISI 316L samples, increased levels of ICAM-1 were detected. In HUVEC coincubated with the culture medium of PBMC, previously put in contact with the samples under study, a noteworthy increase in ICAM-1, VCAM-1, and E-selectin levels was always registered, with the exception of VCAM-1, which was not affected by the untreated sample. In conclusion, even if the treated samples do not show a marked increase in biocompatibility in comparison with the untreated alloy, their higher corrosion resistance may suggest a better performance as the contact with physiological environment becomes longer. (c) 2006 Wiley Periodicals, Inc.

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 16983653     DOI: 10.1002/jbm.a.30846

Source DB:  PubMed          Journal:  J Biomed Mater Res A        ISSN: 1549-3296            Impact factor:   4.396


  8 in total

1.  Biocompatibility and characterization of a Kolsterised(®) medical grade cobalt-chromium-molybdenum alloy.

Authors:  Malcolm Caligari Conti; Andreas Karl; Pierre Schembri Wismayer; Joseph Buhagiar
Journal:  Biomatter       Date:  2014-01-17

2.  Evaluation of the biocompatibility of S-phase layers on medical grade austenitic stainless steels.

Authors:  Joseph Buhagiar; Thomas Bell; Rachel Sammons; Hanshan Dong
Journal:  J Mater Sci Mater Med       Date:  2011-03-25       Impact factor: 3.896

3.  Biocompatibility studies of low temperature nitrided and collagen-I coated AISI 316L austenitic stainless steel.

Authors:  M Martinesi; M Stio; C Treves; F Borgioli
Journal:  J Mater Sci Mater Med       Date:  2013-03-08       Impact factor: 3.896

4.  In vitro response of human peripheral blood mononuclear cells to AISI 316L austenitic stainless steel subjected to nitriding and collagen coating treatments.

Authors:  Maria Stio; Maria Martinesi; Cristina Treves; Francesca Borgioli
Journal:  J Mater Sci Mater Med       Date:  2015-02-06       Impact factor: 3.896

5.  Plasma Electrolytic Polishing-An Ecological Way for Increased Corrosion Resistance in Austenitic Stainless Steels.

Authors:  Viera Zatkalíková; Štefan Podhorský; Milan Štrbák; Tatiana Liptáková; Lenka Markovičová; Lenka Kuchariková
Journal:  Materials (Basel)       Date:  2022-06-14       Impact factor: 3.748

6.  The Spatiotemporal Control of Osteoblast Cell Growth, Behavior, and Function Dictated by Nanostructured Stainless Steel Artificial Microenvironments.

Authors:  Udesh Dhawan; Hsu-An Pan; Meng-Je Shie; Ying Hao Chu; Guewha S Huang; Po-Chun Chen; Wen Liang Chen
Journal:  Nanoscale Res Lett       Date:  2017-02-06       Impact factor: 4.703

7.  Potential proinflammatory effects of hydroxyapatite nanoparticles on endothelial cells in a monocyte-endothelial cell coculture model.

Authors:  Xin Liu; Jiao Sun
Journal:  Int J Nanomedicine       Date:  2014-03-11

8.  Human Bone Marrow-Derived Mesenchymal Cell Reactions to 316L Stainless Steel: An in Vitro Study on Cell Viability and Interleukin-6 Expression.

Authors:  Iwan Budiwan Anwar; Asep Santoso; Eko Saputra; Rifky Ismail; J Jamari; Emile Van der Heide
Journal:  Adv Pharm Bull       Date:  2017-06-30
  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.