Literature DB >> 16960827

Biodegradable polyurethane cancellous bone graft substitutes in the treatment of iliac crest defects.

Sylwester Gogolewski1, Katarzyna Gorna.   

Abstract

Porous scaffolds were produced from newly designed biodegradable, segmented aliphatic polyurethanes of various chemical compositions and hydrophilic-to-hydrophobic segment ratios. The scaffolds were implanted into monocortical defects in the iliac crest of healthy sheep for 6 months. The resected cortex was not repositioned. The ilium defects, which were not implanted with polyurethane scaffolds, were used as controls. In none of the control defects was there bone regeneration at the time of euthanasia. The defects implanted with porous scaffolds from polyurethanes were healed to varying extents with cancellous bone. The structure of the regenerated cancellous bone was radiographically denser than the structure of native bone. New bone that was formed in the scaffolds with a higher amount of hydrophilic component contained more calcium phosphate deposit than the bone formed in the scaffolds with a lower amount of the hydrophilic component. There was no new cortex formed over the defect, but a thin layer of soft tissue covered the newly formed cancellous bone. (c) 2006 Wiley Periodicals, Inc.

Entities:  

Mesh:

Substances:

Year:  2007        PMID: 16960827     DOI: 10.1002/jbm.a.30834

Source DB:  PubMed          Journal:  J Biomed Mater Res A        ISSN: 1549-3296            Impact factor:   4.396


  13 in total

1.  Three-dimensional scaffolds for tissue engineering: the importance of uniformity in pore size and structure.

Authors:  Sung-Wook Choi; Yu Zhang; Younan Xia
Journal:  Langmuir       Date:  2010-11-23       Impact factor: 3.882

2.  Long-term in vivo experimental investigations on magnesium doped hydroxyapatite bone substitutes.

Authors:  M Sartori; G Giavaresi; M Tschon; L Martini; L Dolcini; M Fiorini; D Pressato; M Fini
Journal:  J Mater Sci Mater Med       Date:  2014-02-20       Impact factor: 3.896

3.  Waiting for Aπαταω: 250 Years Later.

Authors:  Victoria Wu; Vuk Uskoković
Journal:  Found Sci       Date:  2019-04-03       Impact factor: 1.238

4.  Investigating the Effects of Surface-Initiated Polymerization of ε-Caprolactone to Bioactive Glass Particles on the Mechanical Properties of Settable Polymer/Ceramic Composites.

Authors:  Andrew J Harmata; Catherine L Ward; Katarzyna J Zienkiewicz; Joseph C Wenke; Scott A Guelcher
Journal:  J Mater Res       Date:  2014       Impact factor: 3.089

5.  Ability of polyurethane foams to support placenta-derived cell adhesion and osteogenic differentiation: preliminary results.

Authors:  S Bertoldi; S Farè; M Denegri; D Rossi; H J Haugen; O Parolini; M C Tanzi
Journal:  J Mater Sci Mater Med       Date:  2009-12-10       Impact factor: 3.896

6.  Elastomeric enriched biodegradable polyurethane sponges for critical bone defects: a successful case study reducing donor site morbidity.

Authors:  Catarina Lavrador; Ramiro Mascarenhas; Paulo Coelho; Cláudia Brites; Alfredo Pereira; Sylwester Gogolewski
Journal:  J Mater Sci Mater Med       Date:  2016-01-22       Impact factor: 3.896

7.  Injectable biodegradable polyurethane scaffolds with release of platelet-derived growth factor for tissue repair and regeneration.

Authors:  Andrea E Hafeman; Bing Li; Toshitaka Yoshii; Katarzyna Zienkiewicz; Jeffrey M Davidson; Scott A Guelcher
Journal:  Pharm Res       Date:  2008-05-31       Impact factor: 4.200

8.  Microporous biodegradable polyurethane membranes for tissue engineering.

Authors:  Yuen Kee Tsui; Sylwester Gogolewski
Journal:  J Mater Sci Mater Med       Date:  2009-03-20       Impact factor: 3.896

9.  Manufacturing of biodegradable polyurethane scaffolds based on polycaprolactone using a phase separation method: physical properties and in vitro assay.

Authors:  Azadeh Asefnejad; Mohammad Taghi Khorasani; Aliasghar Behnamghader; Babak Farsadzadeh; Shahin Bonakdar
Journal:  Int J Nanomedicine       Date:  2011-10-18

10.  Preliminary In Vitro Assessment of Stem Cell Compatibility with Cross-Linked Poly(ε-caprolactone urethane) Scaffolds Designed through High Internal Phase Emulsions.

Authors:  Sylvie Changotade; Gabriela Radu Bostan; Anne Consalus; Florence Poirier; Juliette Peltzer; Jean-Jacques Lataillade; Didier Lutomski; Géraldine Rohman
Journal:  Stem Cells Int       Date:  2015-05-28       Impact factor: 5.443

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.