Literature DB >> 16918616

Allergic contact dermatitis caused by epoxy resin systems in industrial painters.

Olve Rømyhr1, Allan Nyfors, Håkon Lasse Leira, Hans Thore Smedbold.   

Abstract

A group of industrial painters employed in 6 companies of the Norwegian oil industry was followed to assess the incidence of allergic contact dermatitis (ACD) caused by exposure to epoxy resin systems. The study lasted from 1 September 1997 to 31 August 2001 and included 2236 workers, contributing 5113 person years. Commercially available patch test series were supplemented with a special study series based on known or suspected sensitizers present at the workplaces. Of 57 patch-tested workers, 23 with ACD caused by epoxy resin systems were found, indicating an incidence rate of 4.5/1000 person years. In our study patch test series, 4 workers (17%) were identified solely by patch tests to 2,4,6-tris-(dimethylaminomethyl)phenol (tris-DMP), m-xylene-alpha,alpha-diamine (XAD), and/or 2,2,4 trimethylhexamethylenediamine. Positive patch tests to tris-DMP and XAD were seen in 7 and 8 workers, respectively, indicating that the 2 chemicals are important sensitizers in industrial painters. They are, however, not classified as skin sensitizers according to the European regulations on the classification and labelling of dangerous chemicals. The results show the usefulness of including patch tests based on an investigation of known and suspected skin sensitizers present at the workplaces.

Entities:  

Mesh:

Substances:

Year:  2006        PMID: 16918616     DOI: 10.1111/j.1600-0536.2006.00894.x

Source DB:  PubMed          Journal:  Contact Dermatitis        ISSN: 0105-1873            Impact factor:   6.600


  3 in total

1.  Occupational sensitization to epoxy resins in Northeastern Italy (1996-2010).

Authors:  Andrea Prodi; Francesca Rui; Anna Belloni Fortina; Maria Teresa Corradin; Francesca Larese Filon
Journal:  Int J Occup Environ Health       Date:  2015

2.  Comparison of product safety data sheet ingredient lists with skin irritants and sensitizers present in a convenience sample of light-curing resins used in additive manufacturing.

Authors:  Lauren N Bowers; Anand C Ranpara; Katherine A Roach; Alycia K Knepp; Elizabeth D Arnold; Aleksandr B Stefaniak; M Abbas Virji
Journal:  Regul Toxicol Pharmacol       Date:  2022-05-31       Impact factor: 3.598

Review 3.  In vitro methods for hazard assessment of industrial chemicals - opportunities and challenges.

Authors:  Chin Lin Wong; Sussan Ghassabian; Maree T Smith; Ai-Leen Lam
Journal:  Front Pharmacol       Date:  2015-05-05       Impact factor: 5.810

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.