Literature DB >> 16817189

Visualising fouling of a chromatographic matrix using confocal scanning laser microscopy.

Sun Chau Siu1, Rihab Boushaba, Vithaya Topoyassakul, Alex Graham, Sorwar Choudhury, Guy Moss, Nigel J Titchener-Hooker.   

Abstract

Confocal scanning laser microscopy (CSLM) was used to visualise the spatial location of foulants during the fouling of Q Sepharose FF matrix in finite batch experiments and for examining the subsequent effectiveness of clean-in-place (CIP) treatments in cleaning the heavily fouled beads. Beads were severely fouled with partially clarified E. coli homogenate by contacting the beads with the foulant for contact times of 5 min, 1 or 12 h. The use of two different fluorescent dyes, PicoGreen and Cy5.5, for labelling genomic PicoGreen-labelled dsDNA and protein respectively, allowed the direct observation of the chromatographic beads. The extent of fouling was assessed by measuring the subsequent adsorption of Cy5.5-labelled BSA to the beads. Control studies established that the labelling of BSA did not affect significantly the protein properties. In the control case of contacting the unfouled matrix with Cy5.5-labelled BSA, protein was able to penetrate the entire matrix volume. After fouling, Cy5.5-labelled BSA was unable to penetrate the bead but only to bind near the bead surface where it slowly displaced PicoGreen-conjugated dsDNA, which bound only at the exterior of the beads. Labelled host cell proteins bound throughout the bead interior but considerably less at the core; suggesting that other species might have occupied that space. The gross levels of fouling achieved drastically reduced the binding capacity and maximum Cy5.5-labelled BSA uptake rate. The capacity of the resin was reduced by 2.5-fold when incubated with foulant for up to 1 h. However, when the resin was fouled for a prolonged time of 12 h a further sixfold decrease in capacity was seen. The uptake rate of Cy5.5-labelled BSA decreased with increased fouling time of the resin. Incubating the fouled beads in 1 M NaCl dissociated PicoGreen-labelled dsDNA from the bead exterior within 15 min of incubation but proved ineffective in removing all the foulant protein. Cy5.5-labelled BSA was still unable to bind beyond the outer region of the beads. A harsher CIP treatment of 1 M NaCl dissolved in 1 M NaOH was also ineffective in removing all the foulant protein but did remove PicoGreen-conjugated dsDNA within 15 min of incubation. Cy5.5-labelled BSA was able to bind throughout the bead interior after this more aggressive CIP treatment but at a lower capacity than in the case of fresh beads. The competitive adsorption of BacLight Red-labelled whole cells or cell debris and PicoGreen-conjugated dsDNA was also visualised using CSLM. (c) 2006 Wiley Periodicals, Inc.

Entities:  

Mesh:

Substances:

Year:  2006        PMID: 16817189     DOI: 10.1002/bit.21028

Source DB:  PubMed          Journal:  Biotechnol Bioeng        ISSN: 0006-3592            Impact factor:   4.530


  2 in total

1.  Experimental Study of Membrane Fouling during Crossflow Microfiltration of Yeast and Bacteria Suspensions: Towards an Analysis at the Microscopic Level.

Authors:  Ines Ben Hassan; Monia Ennouri; Christine Lafforgue; Philippe Schmitz; Abdelmoneim Ayadi
Journal:  Membranes (Basel)       Date:  2013-05-10

2.  Fouling of an anion exchange chromatography operation in a monoclonal antibody process: Visualization and kinetic studies.

Authors:  Edward J Close; Jeffrey R Salm; Timothy Iskra; Eva Sørensen; Daniel G Bracewell
Journal:  Biotechnol Bioeng       Date:  2013-03-31       Impact factor: 4.530

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.