Retention of Cd, Zn and Co on hydroxyapatite filters.

This study qualifies and quantifies the immobilization of Cd, Zn and Co, (used as models of bivalent metal ions due to their relevant toxicity) in filters of synthetic hydroxyapatite (HAP) [Ca5(PO4)3OH]. They were flushed with solutions containing Cd (1 x 10(-5)M), Zn and Co (1 x 10(-4)M) at constant pH (8.6) and ionic strength (0.01 M). The concentration of these metal ions in the outlet was measured by ICP-OEM spectroscopy. The software PHREEQC (version 2.4.2) was used to model sorption process and the potential effect of salinity (KCl), pH, alkalinity (NaHCO3) and hardness (CaCl2) over the efficiency of the treatment. Results showed an excellent retention capacity of HAP for Cd, Zn and Co. Sorption data were successfully described considering a mix model of surface complexation onto phosphate surface groups, ionic exchange in surface calcium sites and the precipitation of ZnO. Co exchange and surface complexation constants (Kex and Kc) were taken from previous experiments, while KexCd=0.32 and KcCd=0.63 were estimated from our modeling results. Predictive values of metal ion sorption show that: (a) an increase in hardness does not play a significant role in the retention capacity of these metals on HAP; (b) an increase in alkalinity promotes the precipitation of MeCO3 which could alter the hydrodynamic of the column; (c) a decrease in pH and an increase in salinity inhibit ZnO precipitation enhancing Zn and Cd adsorption and decreasing Co retention on HAP.