Literature DB >> 16572073

Experimental study on stability of a high-porosity expanded polytetrafluoroethylene graft in dogs.

Mitsuhiro Isaka1, Toshiya Nishibe, Yasuhiro Okuda, Masaru Saito, Takahiro Seno, Kazuto Yamashita, Yasuharu Izumisawa, Tadao Kotani, Keishu Yasuda.   

Abstract

PURPOSE: The purpose of the present study was to evaluate the stability of a high-porosity expanded polytetrafluoroethylene (ePTFE) graft, which has been shown to possess excellent biocompatibility and tissue integration.
METHODS: The graft used in the present study was a high-porosity ePTFE graft , which had an average internodal distance of approximately 60 microm and a random node architecture with tortuous path channels extending from the outer to the inner surface. Eleven beagle dogs (each group n = 3 or 4) weighing 10-12 kg were used. The graft, with a 6 mm inside diameter and a 30-40 mm length, was implanted into the canine abdominal aorta and retrieved after 2-80 weeks. The deformation of the graft was evaluated by conventional computed tomography (CT). The radial tensile strength, longitudinal tensile strength, and suture retention strength of the graft were measured after 2-80 weeks.
RESULTS: CT studies showed no anastomotic aneurysm or deformation of the graft. Physical tests demonstrated no significant deterioration in suture retention strength, radial tensile strength or longitudinal tensile strength for periods ranging from 2-80 weeks compared to pre-implantation grafts.
CONCLUSION: The graft possesses adequate stability that ensures safe and effective clinical use.

Entities:  

Mesh:

Substances:

Year:  2006        PMID: 16572073

Source DB:  PubMed          Journal:  Ann Thorac Cardiovasc Surg        ISSN: 1341-1098            Impact factor:   1.520


  4 in total

Review 1.  ePTFE soft tissue patch reconstruction of hemidiaphragmatic agenesis with late clinical presentation.

Authors:  L Fei; C Saviano; F Moccia; G del Genio; V Trapani; A Nunziale; G Lombardi; M Cecchi
Journal:  Hernia       Date:  2007-06-28       Impact factor: 4.739

2.  A multilayered scaffold of a chitosan and gelatin hydrogel supported by a PCL core for cardiac tissue engineering.

Authors:  Seokwon Pok; Jackson D Myers; Sundararajan V Madihally; Jeffrey G Jacot
Journal:  Acta Biomater       Date:  2012-11-02       Impact factor: 8.947

3.  Tissue Engineering of Blood Vessels: Functional Requirements, Progress, and Future Challenges.

Authors:  Vivek A Kumar; Luke P Brewster; Jeffrey M Caves; Elliot L Chaikof
Journal:  Cardiovasc Eng Technol       Date:  2011-09-01       Impact factor: 2.495

4.  Mimicking the Mechanical Properties of Aortic Tissue with Pattern-Embedded 3D Printing for a Realistic Phantom.

Authors:  Jaeyoung Kwon; Junhyeok Ock; Namkug Kim
Journal:  Materials (Basel)       Date:  2020-11-09       Impact factor: 3.623

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.