Literature DB >> 16556541

Development of near zero-order release dosage forms using three-dimensional printing (3-DP) technology.

Chen-Chao Wang1, Monica R Tejwani Motwani, Willie J Roach, Jennifer L Kay, Jaedeok Yoo, Henry L Surprenant, Donald C Monkhouse, Timothy J Pryor.   

Abstract

Three near zero-order controlled-release pseudoephedrine hydrochloride (PEH) formulations demonstrating proportional release rates were developed using 3-Dimensional Printing (3-DP) technology. Mixtures of Kollidon SR and hydroxypropylmethyl cellulose (HPMC) were used as drug carriers. The release rates were adjusted by varying the Kollidon SR-HPMC ratio while keeping fabrication parameters constant. The dosage forms were composed of an immediate release core and a release rate regulating shell, fabricated with an aqueous PEH and an ethanolic triethyl citrate (TEC) binder, respectively. The dosage form design called for the drug to be released via diffusional pathways formed by HPMC in the shell matrix. The release rate was shown to increase correspondingly with the fraction of HPMC contained in the polymer blend. The designed formulations resulted in dosage forms that were insensitive to changes in pH of the dissolution medium, paddle stirring rate, and the presence/absence of a sinker. The near zero-order release properties were unchanged regardless of the dissolution test being performed on either single cubes or on a group of eight cubes encased within a gelatin capsule shell. The chemical and dissolution properties of the three formulations remained unchanged following 1 month's exposure to 25 degrees C/60% RH or 40 degrees C/75% RH environment under open container condition. The in vivo performance of the three formulations was evaluated using a single-dose, randomized, open-label, four-way crossover clinical study composed of 10 fasted healthy volunteers. The pharmacokinetic parameters were analyzed using a noncompartmental model. Qualitative rank order linear correlations between in vivo absorption profiles and in vitro dissolution parameters (with slope and intercept close to unity and origin, respectively) were obtained for all three formulations, indicating good support for a Level A in vivo/in vitro correlation.

Entities:  

Mesh:

Substances:

Year:  2006        PMID: 16556541     DOI: 10.1080/03639040500519300

Source DB:  PubMed          Journal:  Drug Dev Ind Pharm        ISSN: 0363-9045            Impact factor:   3.225


  10 in total

1.  Mechanical property characterization of bilayered tablets using nondestructive air-coupled acoustics.

Authors:  Ilgaz Akseli; Dipankar Dey; Cetin Cetinkaya
Journal:  AAPS PharmSciTech       Date:  2010-01-09       Impact factor: 3.246

2.  Optimization of nanoparticle drug microcarrier on the pharmacokinetics of drug release: a preliminary study.

Authors:  E Y K Ng; W K Ng; S S Chiam
Journal:  J Med Syst       Date:  2008-04       Impact factor: 4.460

Review 3.  Emergence of 3D Printed Dosage Forms: Opportunities and Challenges.

Authors:  Mohamed A Alhnan; Tochukwu C Okwuosa; Muzna Sadia; Ka-Wai Wan; Waqar Ahmed; Basel Arafat
Journal:  Pharm Res       Date:  2016-05-18       Impact factor: 4.200

Review 4.  Additive Manufacturing of Solid Products for Oral Drug Delivery Using Binder Jetting Three-Dimensional Printing.

Authors:  Yingya Wang; Anette Müllertz; Jukka Rantanen
Journal:  AAPS PharmSciTech       Date:  2022-07-14       Impact factor: 4.026

Review 5.  Pharmacogenomic phase transition from personalized medicine to patient-centric customized delivery.

Authors:  Arun Radhakrishnan; Gowthamarajan Kuppusamy; Sivasankaran Ponnusankar; Nikhitha K Shanmukhan
Journal:  Pharmacogenomics J       Date:  2019-12-10       Impact factor: 3.550

Review 6.  Nanogels for Pharmaceutical and Biomedical Applications and Their Fabrication Using 3D Printing Technologies.

Authors:  Hyunah Cho; Udayabhanu Jammalamadaka; Karthik Tappa
Journal:  Materials (Basel)       Date:  2018-02-16       Impact factor: 3.623

7.  Development of a gastroretentive delivery system for acyclovir by 3D printing technology and its in vivo pharmacokinetic evaluation in Beagle dogs.

Authors:  Soyoung Shin; Tae Hwan Kim; Seok Won Jeong; Seung Eun Chung; Da Young Lee; Do-Hyung Kim; Beom Soo Shin
Journal:  PLoS One       Date:  2019-05-15       Impact factor: 3.240

Review 8.  Polymers for Extrusion-Based 3D Printing of Pharmaceuticals: A Holistic Materials-Process Perspective.

Authors:  Mohammad A Azad; Deborah Olawuni; Georgia Kimbell; Abu Zayed Md Badruddoza; Md Shahadat Hossain; Tasnim Sultana
Journal:  Pharmaceutics       Date:  2020-02-03       Impact factor: 6.321

Review 9.  3D Printing as a Promising Tool in Personalized Medicine.

Authors:  Vanessa Marcia Vaz; Lalit Kumar
Journal:  AAPS PharmSciTech       Date:  2021-01-17       Impact factor: 3.246

Review 10.  The Evolution of the 3D-Printed Drug Delivery Systems: A Review.

Authors:  Ildikó Bácskay; Zoltán Ujhelyi; Pálma Fehér; Petra Arany
Journal:  Pharmaceutics       Date:  2022-06-21       Impact factor: 6.525

  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.