Literature DB >> 16524926

Size selective dustiness and exposure; simulated workplace comparisons.

Derk H Brouwer1, Ingrid H M Links, Sjaak A F De Vreede, Yvette Christopher.   

Abstract

A simulated workplace study was conducted to investigate the relation between inhalation exposure and dustiness determined with a rotating drum dustiness tester. Three powders were used in the study, i.e. magnesium stearate, representing a very dusty powder, and aluminium oxide and calcium carbonate, representing low and very low dusty powders, respectively. Two scenarios of handling small volume of powders were included; sweeping/cleaning and scooping/weighing/adding. Size-selective dust exposure was assessed using MultiDust (dual-fraction) IOM and RespiCon sampling heads. For the present operation scenarios, dustiness showed itself to be the major determinant of exposure and explained approximately 70% of the exposure variances. The ratios of respirable and inhalable fractions as determined by dustiness tests were comparable with the ratios observed for exposure. The results emphasize the relevance of dustiness as a parameter to characterize substances according to potential for exposure.

Entities:  

Mesh:

Substances:

Year:  2006        PMID: 16524926     DOI: 10.1093/annhyg/mel015

Source DB:  PubMed          Journal:  Ann Occup Hyg        ISSN: 0003-4878


  6 in total

1.  Computational Fluid Dynamics Analysis of the Venturi Dustiness Tester.

Authors:  Prahit Dubey; Urmila Ghia; Leonid A Turkevich
Journal:  Powder Technol       Date:  2017-05       Impact factor: 5.134

2.  A novel device for measuring respirable dustiness using low-mass powder samples.

Authors:  Patrick T O'Shaughnessy; Mitchell Kang; Daniel Ellickson
Journal:  J Occup Environ Hyg       Date:  2012       Impact factor: 2.155

3.  SWeRF--A method for estimating the relevant fine particle fraction in bulk materials for classification and labelling purposes.

Authors:  Ingeborg Pensis; Frank Luetzenkirchen; Bernd Friede
Journal:  Ann Occup Hyg       Date:  2014-01-03

4.  Dustiness of fine and nanoscale powders.

Authors:  Douglas E Evans; Leonid A Turkevich; Cynthia T Roettgers; Gregory J Deye; Paul A Baron
Journal:  Ann Occup Hyg       Date:  2012-10-12

5.  Assessment of nanoparticle exposure in nanosilica handling process: including characteristics of nanoparticles leaking from a vacuum cleaner.

Authors:  Boowook Kim; Hyunwook Kim; Il Je Yu
Journal:  Ind Health       Date:  2013-12-21       Impact factor: 2.179

6.  Powder Intrinsic Properties as Dustiness Predictor for an Efficient Exposure Assessment?

Authors:  Neeraj Shandilya; Eelco Kuijpers; Ilse Tuinman; Wouter Fransman
Journal:  Ann Work Expo Health       Date:  2019-11-13       Impact factor: 2.179

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.