Literature DB >> 16512232

Determination of nifuroxazide and drotaverine hydrochloride in pharmaceutical preparations by three independent analytical methods.

Fadia H Metwally1, Mohammed Abdelkawy, Ibrahim A Naguib.   

Abstract

Three new, different, simple, sensitive, and accurate methods were developed for quantitative determination of nifuroxazide (I) and drotaverine hydrochloride (II) in a binary mixture. The first method was spectrophotometry, which allowed determination of I in the presence of II using a zero-order spectrum with an analytically useful maximum at 364.5 nm that obeyed Beer's law over a concentration range of 2-10 microg/mL with mean percentage recovery of 100.08 +/- 0.61. Determination of II in presence of I was obtained by second derivative spectrophotometry at 243.6 nm, which obeyed Beer's law over a concentration range of 2-10 microg/mL with mean recovery of 99.82 +/- 1.46%. The second method was spectrodensitometry, with which both drugs were separated on a silica gel plate using chloroform-acetone-methanol-glacial acetic acid (6 + 3 + 0.9 + 0.1) as the mobile phase and ultraviolet (UV) detection at 365 nm over a concentration range of 0.2-1 microg/band for both drugs, with mean recoveries of 99.99 +/- 0.15 and 100.00 +/- 0.34% for I and II, respectively. The third method was reversed-phase liquid chromatography using acetonitrile-water (40 + 60, v/v; adjusted to pH 2.55 with orthophosphoric acid) as the mobile phase and pentoxifylline as the internal standard at a flow rate of 1 mU/min with UV detection at 285 nm at ambient temperature over a concentration range of 2-10 microg/mL for both drugs, with mean recoveries of 100.24 +/- 1.51 and 100.08 +/- 0.78% for I and II, respectively. The proposed methods were checked using laboratory-prepared mixtures and were successfully applied for the analysis of pharmaceutical formulations containing the above drugs with no interference from other dosage form additives. The validity of the suggested procedures was further assessed by applying the standard addition technique which was found to be satisfactory, and the percentage recoveries obtained were in accordance with those given by the EVA Pharma reference spectrophotometric method.

Entities:  

Mesh:

Substances:

Year:  2006        PMID: 16512232

Source DB:  PubMed          Journal:  J AOAC Int        ISSN: 1060-3271            Impact factor:   1.913


  4 in total

1.  A simple and sensitive spectrofluorimetric method for analysis of some nitrofuran drugs in pharmaceutical preparations.

Authors:  Tarek Saied Belal
Journal:  J Fluoresc       Date:  2008-02-01       Impact factor: 2.217

2.  Development and validation of simultaneous spectrophotometric methods for drotaverine hydrochloride and aceclofenac from tablet dosage form.

Authors:  S A Shah; D R Shah; R S Chauhan; J R Jain
Journal:  Indian J Pharm Sci       Date:  2011-05       Impact factor: 0.975

3.  Development and Validation of a Stability-Indicating RP-HPLC Method for the Estimation of Drotaverine Impurities in API and Pharmaceutical Formulation.

Authors:  Veera Raghava Raju Thummala; Satya Sankarsana Jagan Mohan Tharlapu; Vijay Kumar Rekulapalli; Mrutyunjaya Rao Ivaturi; Someswara Rao Nittala
Journal:  Sci Pharm       Date:  2013-10-21

4.  A validated spectrofluorimetric method for the determination of nifuroxazide through coumarin formation using experimental design.

Authors:  Asmaa Ahmed El-Zaher; Marianne Alphonse Mahrouse
Journal:  Chem Cent J       Date:  2013-05-23       Impact factor: 4.215

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.