Determination of phosphoric acid mono- and diesters in municipal wastewater by solid-phase extraction and ion-pair liquid chromatography-tandem mass spectrometry.

The first analytical method for the determination of 13 phosphoric acid mono- and diesters from aqueous samples is presented. The method consists of solid-phase extraction (SPE) and ion-pair liquid chromatographic separation with tri-n-butylamine coupled to electrospray ionization tandem mass spectrometry in the negative ion mode. Due to a lack of pure standards, only 3 of the 13 esters could be quantified. SPE recoveries ranged from 71 to 112% for di-n-butyl phosphate, diphenyl phosphate, and di-(2-ethylhexyl) phosphate (DEHP) with limits of quantification from 7 to 14 ng/L for 100-mL samples. At analyte concentrations >or=1 microg/L, aqueous samples can be analyzed by direct injection without extraction. In municipal wastewater, six diesters and one monoester were unambiguously identified by comparison with synthesized reference material. DEHP showed highest concentrations of 60 and 5 microg/L in raw and treated wastewater, respectively. The detection of monoethylhexyl phosphate was confirmed by LC-Q-TOF-MS analysis, and it was found at a concentration level comparable to DEHP. Laboratory degradation tests show that phosphoric acid diesters can be formed as intermediates in the microbial degradation of trialkyl phosphates that are being used as flame retardants and plasticizers.