Enzymatic, alkaline, and autocatalytic degradation of poly(L-lactic acid): effects of biaxial orientation.

The hydrolytic degradation of biaxially oriented and de-oriented (melt-crystallized) poly(l-lactic acid) (PLLA) films was investigated in Tris-HCl-buffered solution (pH 8.6) with proteinase K, alkaline solution, and phosphate-buffered solution (pH 7.4) by the use of gravimetry, gel permeation chromatography, differential scanning calorimetry, and scanning electron microscopy. Biaxial orientation disturbed the proteinase K-catalyzed enzymatic degradation of PLLA films and the effects of biaxial orientation overcame those of crystallinity. The former may be due to the fact the enzyme cannot attach to the extended (strained) chains in the amorphous regions of the biaxially oriented PLLA film or cannot catalyze the cleavage of the strained chains. Another probable cause is that the enzyme can act only at the film surface of the biaxially oriented PLLA film, in marked contrast with the case of the de-oriented PLLA films where enzymatic degradation can proceed beneath the spherulitic crystalline residues. The effects of biaxial orientation on the alkaline and autocatalytic degradation of the PLLA films were insignificant for the periods studied here. The crystallinity rather than the biaxial orientation seems to determine the alkaline and autocatalytic degradation rates of the PLLA films. The accumulation of crystalline residues formed as a result of selective cleavage and removal of the amorphous chains was observed for the de-oriented PLLA films, but not for the biaxially oriented PLLA film, when degraded in the presence of proteinase K. This means the facile release of formed crystalline residues from the surface of the biaxially oriented PLLA film during enzymatic degradation, due to the fact that the crystalline regions of the biaxially oriented PLLA film were oriented with their c axis parallel to the film surface.