The causes, prevention, and clinical management of broken endodontic rotary files.

Complications can occur during many dental procedures. The prepared clinician responds by either correcting the problem during treatment, or, ideally, preventing the problem from occurring in the first place. In endodontic treatment separated rotary Ni-Ti files are a common procedural problem. Through understanding that the main causes of file breakage are cyclic fatigue and torsional stress, a dentist can best prevent this occurrence by using hand files before rotary files, creating a straight-line (glide path) access into a canal, and preflaring the coronal portion before using rotary files in the apical third of the canal. In addition, using an up and down motion with the electric slow-speed handpiece (not allowing the file to bind within the canal) will significantly reduce the incidence of file breakage. If a file does break, successful removal primarily depends on the location of the file in the canal rather than the specific technique employed for removal. A case does not necessarily fail if the separated file cannot be removed. The prognosis when file separation occurs can still be favorable, especially if care was taken to reduce the critical concentration of canal debris with hand instrumentation and chemical irrigation prior to rotary file insertion. In addition, the introduction of a new CS file design will help the dentist increase the chance of removing the file in the event of breakage.