PURPOSE: The first purpose of this study was to compare the retentive values of zinc phosphate and Panavia F resin cements when used for luting cast dowel and cores. The second purpose was to determine whether the use of a lubricant when making the resin pattern for a custom dowel and core would have an effect on the final retention of dowels cemented with either zinc phosphate or Panavia F cements. METHODS AND MATERIALS: Sixty-three caries-free extracted single-rooted human teeth were randomly divided into three groups of 21. Root canal preparations were standardized for all 63 teeth. Clinical protocols for fabricating and cementing dowel and core restorations were examined, comparing zinc phosphate and Panavia F resin cements. Direct dowel patterns were fabricated using the Para Post system and cast in a noble metal alloy. Group I dowel spaces were lubricated with GC lubricant prior to dowel pattern fabrication and cleaned with Cavidry solvent before cementing the cast dowel and core with zinc phosphate cement. Group II dowel spaces were rinsed with water only prior to dowel pattern fabrication. The dowels and cores in this group were cemented with Panavia F resin cement. Group III dowel spaces were lubricated with GC lubricant prior to dowel pattern fabrication; the dowel spaces were cleaned with Cavidry solvent before the cast dowel and cores were cemented with Panavia F cement. The tensile force necessary to remove the cast dowel and cores was determined using a universal testing machine. Results were statistically analyzed using one-way ANOVA and Tukey's HSD test. RESULTS: The dowels and cores in Group I had significantly higher retentive values than either of the two Panavia F groups (p< or = 0.001). No difference in retentive values (p > 0.05) was found between dowels luted with either of the lubricating agents in the Panavia F groups. CONCLUSIONS: Zinc phosphate cement had higher retentive values when cementing cast dowel and cores than Panavia F. The type of lubricant used for the resin dowel fabrication (water or GC lubricant that was removed with a solvent) had no effect on the retention of cast dowels cemented with Panavia F.
PURPOSE: The first purpose of this study was to compare the retentive values of zinc phosphate and Panavia F resin cements when used for luting cast dowel and cores. The second purpose was to determine whether the use of a lubricant when making the resin pattern for a custom dowel and core would have an effect on the final retention of dowels cemented with either zinc phosphate or Panavia F cements. METHODS AND MATERIALS: Sixty-three caries-free extracted single-rooted human teeth were randomly divided into three groups of 21. Root canal preparations were standardized for all 63 teeth. Clinical protocols for fabricating and cementing dowel and core restorations were examined, comparing zinc phosphate and Panavia F resin cements. Direct dowel patterns were fabricated using the Para Post system and cast in a noble metal alloy. Group I dowel spaces were lubricated with GC lubricant prior to dowel pattern fabrication and cleaned with Cavidry solvent before cementing the cast dowel and core with zinc phosphate cement. Group II dowel spaces were rinsed with water only prior to dowel pattern fabrication. The dowels and cores in this group were cemented with Panavia F resin cement. Group III dowel spaces were lubricated with GC lubricant prior to dowel pattern fabrication; the dowel spaces were cleaned with Cavidry solvent before the cast dowel and cores were cemented with Panavia F cement. The tensile force necessary to remove the cast dowel and cores was determined using a universal testing machine. Results were statistically analyzed using one-way ANOVA and Tukey's HSD test. RESULTS: The dowels and cores in Group I had significantly higher retentive values than either of the two Panavia F groups (p< or = 0.001). No difference in retentive values (p > 0.05) was found between dowels luted with either of the lubricating agents in the Panavia F groups. CONCLUSIONS:Zinc phosphate cement had higher retentive values when cementing cast dowel and cores than Panavia F. The type of lubricant used for the resin dowel fabrication (water or GC lubricant that was removed with a solvent) had no effect on the retention of cast dowels cemented with Panavia F.
Authors: Ilione Kruschewsky Costa Sousa Oliveira; Ynara Bosco de Oliveira Lima Arsati; Roberta Tarkany Basting; Fabiana Mantovani Gomes França Journal: Int J Dent Date: 2012-01-15
Authors: Luanne Mara Rodrigues De Matos; Lucas Portela Oliveira; Aryvelto Miranda Silva; Jessica Katarine De Abreu Silva; Marcelo Lopes Silva Journal: Dent Res J (Isfahan) Date: 2020-12-10