Palm oil and palm olein frying applications.

Several million tones of palm oil and palm olein are used annually in the world for frying. This paper will discuss their frying performances in three major applications - industrial production of potato chips/crisps, industrial production of pre-fried frozen French fries and in fast food outlets. In the first study, about four tones of potato chips were continuously fried 8 hours a day and five days a week. The palm olein used (with proper management) performed well and was still in excellent condition and usable at the end of the trial. This was reflected in its low free fatty acid (FFA) content of around 0.23%, peroxide value of 4 meq/kg, anisidine value of 16, low polar and polymer contents of 10% and 2%, respectively, induction period (OSI) of 21 hours and high content of tocopehrols and tocotrienols of 530 ppm even after >1900 hours. In the second study in which an average 12 tones pre-fried frozen French fries were continuously fried a day for 5 days a week, palm oil performed excellently as reflected by its low FFA of 0.34%, food oil sensor reading of 1.1, low polar and polymer contents of 17% and 2.8%, respectively, over the 12 days of trial. In the third study in which palm shortening, palm oil and palm olein were simultaneously used to intermittently fry chicken parts in the laboratory simulating the conditions in fast food outlets, the three frying oils also performed very satisfactorily as reflected by their reasonably low FFA of <1%, smoke points of >180 degrees C, and polar and polymer contents of <25% and <6%, respectively, after 5 days of consecutive frying. All the quality indicators did not exceed the maximum discard points for frying oils/fats in the three applications, while the fried food product was well accepted by the in-house train sensory panel using a-nine point hedonic score.