Literature DB >> 16257578

Cost-effective production of 13C, 15N stable isotope-labelled biomass from phototrophic microalgae for various biotechnological applications.

F G Acién Fernández1, J M Fernández Sevilla, T A Egorova-Zachernyuk, E Molina Grima.   

Abstract

The present study outlines a process for the cost-effective production of 13C/15N-labelled biomass of microalgae on a commercial scale. The core of the process is a bubble column photobioreactor with exhaust gas recirculation by means of a low-pressure compressor. To avoid accumulation of dissolved oxygen in the culture, the exhaust gas is bubbled through a sodium sulphite solution prior to its return to the reactor. The engineered system can be used for the production of 13C, 15N, and 13C-15N stable isotope-labelled biomass as required. To produce 13C-labelled biomass, 13CO2 is injected on demand for pH control and carbon supply, whereas for 15N-labelled biomass Na15NO3 is supplied as nitrogen source at the stochiometric concentration. The reactor is operated in semicontinuous mode at different biomass concentrations, yielding a maximum mean biomass productivity of 0.3 gL(-1) day(-1). In order to maximize the uptake efficiency of the labelled substrates, the inorganic carbon is recovered from the supernatant by acidification/desorption processes, while the nitrate is delivered at stochiometric concentration and the harvesting of biomass is performed when the 15NO3- is depleted. In these conditions, elemental analysis of both biomass and supernatant shows that 89.2% of the injected carbon is assimilated into the biomass and 6.9% remains in the supernatant. Based on elemental analysis, 97.8% of the supplied nitrogen is assimilated into the biomass and 1.3% remains in the supernatant. Stable isotope-labelling enrichment has been analysed by GC-MS results showing that the biomass is highly labelled. All the fatty acids are labelled; more than 96% of the carbon present in these fatty acids is 13C. The engineered system was stably operated for 3 months, producing over 160 g of 13C and/or 15N-labelled biomass. The engineered bioreactor can be applied for the labelling of various microalgae.

Entities:  

Mesh:

Substances:

Year:  2005        PMID: 16257578     DOI: 10.1016/j.bioeng.2005.09.002

Source DB:  PubMed          Journal:  Biomol Eng        ISSN: 1389-0344


  5 in total

1.  Biofuels from algae: challenges and potential.

Authors:  Michael Hannon; Javier Gimpel; Miller Tran; Beth Rasala; Stephen Mayfield
Journal:  Biofuels       Date:  2010-09       Impact factor: 2.956

Review 2.  Deuterium and its impact on living organisms.

Authors:  Veronika Kselíková; Milada Vítová; Kateřina Bišová
Journal:  Folia Microbiol (Praha)       Date:  2019-07-27       Impact factor: 2.099

3.  A cost-effective approach to produce 15N-labelled amino acids employing Chlamydomonas reinhardtii CC503.

Authors:  Jesús Nicolás Carcelén; Juan Manuel Marchante-Gayón; Pablo Rodríguez González; Luis Valledor; María Jesús Cañal; José Ignacio García Alonso
Journal:  Microb Cell Fact       Date:  2017-08-18       Impact factor: 5.328

4.  15N Stable Isotope Labeling PSTs in Alexandrium minutum for Application of PSTs as Biomarker.

Authors:  Wancui Xie; Min Li; Lin Song; Rui Zhang; Xiaoqun Hu; Chengzhu Liang; Xihong Yang
Journal:  Toxins (Basel)       Date:  2019-04-08       Impact factor: 4.546

Review 5.  Microalgae metabolites: A rich source for food and medicine.

Authors:  Ramaraj Sathasivam; Ramalingam Radhakrishnan; Abeer Hashem; Elsayed F Abd Allah
Journal:  Saudi J Biol Sci       Date:  2017-11-03       Impact factor: 4.219

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.