BACKGROUND: Microfluidic technology has been utilized in numerous biological applications specifically for miniaturization and simplification of laboratory techniques. We sought to apply microfluidic technology to murine IVF. METHODS: Microfluidic devices measuring 500 microm wide, 180 microm deep, and 2.25 cm in length were designed and fabricated using poly(dimethylsiloxane) (PDMS). Controls were standard centre-well culture dishes with 500 microl of media, half of which also contained PDMS as a material control. Denuded mouse oocytes were placed into microchannels or centre-well dish controls in groups of 10, then co-incubated overnight with epididymal mouse sperm at various concentrations. Fertilization was assessed and Fisher's exact test was used for statistical analysis (P < 0.05 significant). RESULTS: Fertilization rates between the two control groups (42%, no PDMS; 41%, with PDMS; not significant) were similar. Fertilization rates for denuded oocytes at standard mouse insemination sperm concentration (1 degrees 10(6) sperm/ml) was poorer in microchannels (12%) than controls (43%; P < 0.001). As insemination concentrations decreased, fertilization rates improved in microchannels with a plateau between 8 degrees 10(4) and 2 degrees 10(4) sperm/ml (4000-1000 total sperm). At these concentrations, combined fertilization rate for denuded oocytes was significantly higher in microchannels than centre-well dishes (27 versus 10%, respectively; P < 0.001), and was not significantly different from corresponding controls with a sperm concentration of 1 degrees 10(6) (37%; P = 0.06). CONCLUSIONS: Murine IVF can be conducted successfully within microfluidic channels. Lower total numbers and concentrations of sperm are required. Microfluidic devices may ultimately be useful in clinical IVF.
BACKGROUND: Microfluidic technology has been utilized in numerous biological applications specifically for miniaturization and simplification of laboratory techniques. We sought to apply microfluidic technology to murineIVF. METHODS: Microfluidic devices measuring 500 microm wide, 180 microm deep, and 2.25 cm in length were designed and fabricated using poly(dimethylsiloxane) (PDMS). Controls were standard centre-well culture dishes with 500 microl of media, half of which also contained PDMS as a material control. Denuded mouse oocytes were placed into microchannels or centre-well dish controls in groups of 10, then co-incubated overnight with epididymalmouse sperm at various concentrations. Fertilization was assessed and Fisher's exact test was used for statistical analysis (P < 0.05 significant). RESULTS: Fertilization rates between the two control groups (42%, no PDMS; 41%, with PDMS; not significant) were similar. Fertilization rates for denuded oocytes at standard mouse insemination sperm concentration (1 degrees 10(6) sperm/ml) was poorer in microchannels (12%) than controls (43%; P < 0.001). As insemination concentrations decreased, fertilization rates improved in microchannels with a plateau between 8 degrees 10(4) and 2 degrees 10(4) sperm/ml (4000-1000 total sperm). At these concentrations, combined fertilization rate for denuded oocytes was significantly higher in microchannels than centre-well dishes (27 versus 10%, respectively; P < 0.001), and was not significantly different from corresponding controls with a sperm concentration of 1 degrees 10(6) (37%; P = 0.06). CONCLUSIONS:MurineIVF can be conducted successfully within microfluidic channels. Lower total numbers and concentrations of sperm are required. Microfluidic devices may ultimately be useful in clinical IVF.
Authors: Matías A Bettera Marcat; María N Gallea; Gastón L Miño; Marisa A Cubilla; Adolfo J Banchio; Laura C Giojalas; Verónica I Marconi; Héctor A Guidobaldi Journal: Biomicrofluidics Date: 2020-03-30 Impact factor: 2.800