New evidence on the structure of potassium salts of 12-tungstophosphoric acid, KxH3-xPW12O40.

Physicochemical properties and compositions of KxH(3-x)PW12O40 salts, where 2 < or = x < or = 3, have been investigated. It has been found that freshly prepared K2HPW12O40 salt (drying at 313 K) contains particles of heteropolyacid and particles of the neutral potassium salt, the sample being in 78.6% amorphous. On aging at room temperature, the heteropolyacid spreads to form a surface layer covering the neutral potassium salt particles K3PW12O40. Heat treatment of KxH(3-x)PW12O40 salts, where 2 < or = x < 3, from 313 K to higher temperatures induces the transformation of the heteropolyacid-covering K(3) core into a well-dispersed, amorphous surface layer. On further heating of the acidic potassium salts, the surface layer decomposes between 855 and 915 K with the formation of a PW8O26-type bronze as a new phase, the K3PW12O40 salt remaining unchanged. The latter starts to decompose at 1093 K, and in the case of all samples, the process is completed at about 1183 K. Rietveld structure refinement, XPS, and 31P NMR measurements of acidic potassium salts indicate that the core of these salts is always formed by the K3PW12O40 salt, which is covered by a heteropolyacid. Comparison of lattice parameters of the K3 salt and HPW leads to the conclusion that the layer is composed of partially or completely dehydrated heteropolyacid molecules. The coverage of the core by HPW in the K2 sample was estimated to be equal to one monolayer.