Literature DB >> 16143386

In vitro hemocompatibility testing of UV-modified hyaluronan hydrogels.

Leena Pravina Amarnath1, Arvind Srinivas, Anand Ramamurthi.   

Abstract

Hydrogels (hylans) based on cross-linked hyaluronan (HA) are potentially good biomaterials for vascular tissue engineering applications because they are highly non-antigenic and -immunogenic. To facilitate surface endothelialization, vital to vascular deployment, we irradiated the gel surface with low wavelength UV light. This process micro-textures the smooth gel surface to provide sites for cell anchorage and causes limited scission of native long-chain HA yielding smaller fragments that elicit an enhanced cell response. In the current in vitro study, we assessed the effects of UV irradiation on the short-term (<45 min) interaction between hylan gels and human blood cells (RBCs, platelets) and coagulation proteins at physiologic temperature. Although the lowered hydrophilicity of irradiated (UV) hylans elicited greater vascular cell response relative to unmodified (U) hylans, platelet deposition was unaffected and much lower compared to collagen-coated glass controls. The adhered platelets were rounded or mildly pseudopodic and did not express p-selectin, an activation marker. Both gel types induced identical, and minimal platelet release as measured using an platelet factor 4 ELISA, and identically deferred the intrinsic and extrinsic coagulation pathways. Both gel types induced elevated levels of contact activation of bound, but not plasma-phase factor XII relative to controls. Hemolysis rates were also identical and within accepted standards. We conclude that UV-treatment of hylans, useful to improve surface endothelialization, does not compromise their short-term hemocompatibility, vital to their use as vascular implant materials.

Entities:  

Mesh:

Substances:

Year:  2005        PMID: 16143386     DOI: 10.1016/j.biomaterials.2005.08.008

Source DB:  PubMed          Journal:  Biomaterials        ISSN: 0142-9612            Impact factor:   12.479


  16 in total

1.  Characterization of a hierarchical network of hyaluronic acid/gelatin composite for use as a smart injectable biomaterial.

Authors:  Hossein K Heris; Meysam Rahmat; Luc Mongeau
Journal:  Macromol Biosci       Date:  2011-12-06       Impact factor: 4.979

Review 2.  Review: advances in vascular tissue engineering using protein-based biomaterials.

Authors:  Jan P Stegemann; Stephanie N Kaszuba; Shaneen L Rowe
Journal:  Tissue Eng       Date:  2007-11

3.  Fabrication and characterization of chitosan nanoparticles and collagen-loaded polyurethane nanocomposite membrane coated with heparin for atrial septal defect (ASD) closure.

Authors:  Eva Kaiser; Saravana Kumar Jaganathan; Eko Supriyanto; Manikandan Ayyar
Journal:  3 Biotech       Date:  2017-06-29       Impact factor: 2.406

4.  Optical clearing of skin enhanced with hyaluronic acid for increased contrast of optoacoustic imaging.

Authors:  Anton Liopo; Richard Su; Dmitri A Tsyboulski; Alexander A Oraevsky
Journal:  J Biomed Opt       Date:  2016-08       Impact factor: 3.170

5.  Hydrogels based on poly(ethylene glycol) as scaffolds for tissue engineering application: biocompatibility assessment and effect of the sterilization process.

Authors:  Alondra Escudero-Castellanos; Blanca E Ocampo-García; Ma Victoria Domínguez-García; Jaime Flores-Estrada; Miriam V Flores-Merino
Journal:  J Mater Sci Mater Med       Date:  2016-10-17       Impact factor: 3.896

6.  A bioinspired omniphobic surface coating on medical devices prevents thrombosis and biofouling.

Authors:  Daniel C Leslie; Anna Waterhouse; Julia B Berthet; Thomas M Valentin; Alexander L Watters; Abhishek Jain; Philseok Kim; Benjamin D Hatton; Arthur Nedder; Kathryn Donovan; Elana H Super; Caitlin Howell; Christopher P Johnson; Thy L Vu; Dana E Bolgen; Sami Rifai; Anne R Hansen; Michael Aizenberg; Michael Super; Joanna Aizenberg; Donald E Ingber
Journal:  Nat Biotechnol       Date:  2014-10-12       Impact factor: 54.908

7.  Hemocompatibility of hyaluronan enhanced linear low density polyethylene for blood contacting applications.

Authors:  Rachael Simon-Walker; John Cavicchia; David A Prawel; Lakshmi Prasad Dasi; Susan P James; Ketul C Popat
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2017-09-30       Impact factor: 3.368

8.  Tissue Engineering of Blood Vessels: Functional Requirements, Progress, and Future Challenges.

Authors:  Vivek A Kumar; Luke P Brewster; Jeffrey M Caves; Elliot L Chaikof
Journal:  Cardiovasc Eng Technol       Date:  2011-09-01       Impact factor: 2.495

9.  Effect of hyaluronic acid incorporation method on the stability and biological properties of polyurethane-hyaluronic acid biomaterials.

Authors:  Amaliris Ruiz; Kashmila R Rathnam; Kristyn S Masters
Journal:  J Mater Sci Mater Med       Date:  2013-11-26       Impact factor: 3.896

10.  Microwave-assisted surface modification of metallocene polyethylene for improving blood compatibility.

Authors:  Hemanth Mohandas; Gunalan Sivakumar; Palaniappan Kasi; Saravana Kumar Jaganathan; Eko Supriyanto
Journal:  Biomed Res Int       Date:  2013-06-12       Impact factor: 3.411

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.