Alpha-particle induced reactions on natSb and 121Sb with particular reference to the production of the medically interesting radionuclide 124I.

Excitation functions of the reactions (nat)Sb(alpha,xn)(123,124,125,126)I and (121)Sb(alpha,xn)(123,124)I were measured from their respective thresholds up to 26 MeV, with particular emphasis on data for the production of the medically important radionuclide (124)I. The conventional stacked-foil technique was used, and the samples for irradiation were prepared by a sedimentation process. The measured excitation curves were compared with the data available in the literature. From the experimental data the theoretical yields of the investigated radionuclides were calculated as a function of the alpha-particle energy. The calculated yield of (124)I from the (nat)Sb(alpha,xn)(124)I process over the energy range E(alpha) = 22-->13 MeV amounts to 1.02 MBq/microA x h and from the (121)Sb(alpha,n)(124)I reaction over the same energy range to 2.11 MBq/microA x h. The radionuclidic impurity levels are discussed. Use of (nat)Sb as target material would not lead to high-purity (124)I. Using highly enriched (121)Sb as target, production of (124)I of high radionuclidic purity is possible; the batch yield, however, is low.